Hitachi 55VG825 Connecting External Video Sources, Before Operating External Video Source

Connecting External Video Sources

The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your TV set is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs.

The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.

First

BEFORE OPERATING

EXTERNAL VIDEO SOURCE

Connect an external source to the INPUT terminal, then press the INPUTS button to show the INPUTS menu. Use the CURSOR PAD to select the CABLE, AIR or INPUT of your choice. Then press the SELECT button to confirm your choice (see page 24).

NOTE: When the TV is set to VIDEO and a video signal is not received from the VIDEO INPUT JACK on the back panel of the TV (i.e., VCR/laserdisc player, etc. is not connected or the video device is OFF), the set will appear to be OFF.

Input 5

Photo Input

Cable

Air

Input 1

Move SEL Sel.

time use

CONNECTING A COMPOSITE VIDEO AND MONAURAL AUDIO SOURCE TO INPUT1 – INPUT5

	Apparatus Claims of U.S.	CableCARD™
	Patent Nos. 4,631,603;
CABLE	4,577,216; 4,819,098;	(Top of card faces right)
	licensed for limited
	4,907,093; and 6,381,747
	viewing uses only.

Top faces

1.	Connect the cable from the VIDEO OUT of the VCR
	or the laserdisc player to the INPUT (VIDEO) jack,
	as shown on the TV set on the right.
2.	Connect the cable from the AUDIO OUT of the
	VCR or the laserdisc player to the INPUT

Connect the Cable and/or Air cables

MONITOR OUT

S

I

AIR

Y/

VIDEO

Y/

VIDEO

Upgrade Card

HDMI INPUT 1

HDMI INPUT 2

(MONO)/L(AUDIO) jack.

3. Press the INPUTS button, then select INPUT 4

V

I

D

E

O

V

I

D

PB

PR

PB

PR

OPTICAL OUT

Digital Audio

from the INPUTS menu to view the program from

the VCR or the laserdisc player. The VIDEO OSD

label disappears automatically after approximately

E

O

A U D I O

(MONO) (MONO) (MONO)

TV AS CENTER

/ G-LINK (MONO)

L

R

four seconds.

AUDIO TO HI-FI

INPUT 1 INPUT 2 INPUT 3 INPUT 4

4. Select CABLE from the INPUTS menu to return to

the last channel tuned.	Audio Video
	OUTPUT
NOTE: The INPUT 3 can be used in the same	VCR
manner as INPUT 4.

15