Hitachi 55VG825 important safety instructions TV Guide On Screen

TV Guide On Screen

Screen 10:

The TV Guide On Screen system will test the code of your Cable box. No TV, Cable or remote buttons should be pressed while performing the automatic test. After the testing process is complete, the setup procedure will continue, see screen 11.

Screen 11:

Did your Cable box tune to channel 28?

Use the CURSOR PAD and to highlight your choice, then press the SELECT button to continue. If YES: Please see screen 12.

If NO: Select NO to test a different code or select TEST THIS CODE AGAIN to test the same code.

Screen 12:

Do you have an antenna connected? Use the CURSOR PAD and to highlight your choice, then press the SELECT button to continue.

NOTE: In order to receive the program listings, you must select YES in this screen if you chose NO in Screen 3.

Screen 13:

Please confirm your initial settings. Use the CURSOR PAD and to highlight your choice, then press the SELECT button to continue.

If YES, FINISH SETUP PROCESS: Please see screen 14.

If NO, REPEAT SETUP PROCESS: Please see screen 1.

Screen 14:

The Basic TV Guide On Screen system setup has just been completed. Press the SELECT button to continue.

Screen 15:

Would like the TV Guide On-Screen system to control the recording of your VCR?

Use the CURSOR PAD and to highlight your choice, then press the SELECT button to continue. If YES: Please see Screen 16.

If NO: Please see Screen 21.

On-Screen Display