![](/images/new-backgrounds/1225769/225769185x1.webp)
TV Guide On ScreenTM System Frequently Asked Questions
TV Guide On-ScreenTM System Frequently Asked Questions
My Guide listings disappeared after a power failure.
You should begin to receive listings again within 24 hours.
Some channel numbers in the Guide are incorrect.
You can correct them using Change Channel Display under Setup.
I have not received any Guide show listings.
Listings usually begin to appear within 24 hours after a successful Setup. It may take up to 5 days to receive a full 8 days of program listings.
•Check the connections between the TV, cable, antenna, and the IR cable if using a cable box.
•Verify Setup information under Change System Settings.
•Make sure the cable box is On, if applicable.
•Review Screen 4 and Screen 5 in the Initial Guide Setup section.
A show I set to Record did not occur.
•Make sure your recorder is turned Off before the recording begins.
•Make sure there is a tape in the VCR.
•Check the Schedule menu and verify that the show is listed before recording begins.
•Check the placement of the IR cable in front of your recorder.
The TV did not tune to a show I scheduled with the Reminder feature.
•Check the Schedule menu and verify that the show is listed.
•If you have a cable box, check the IR cable connection.
I set a show to Auto-Tune and it did not.
•Check the Schedule menu and verify that the show is listed as a Reminder.
•Highlight the show under Listings and do the following:
•Press the Menu button on the remote.
•Use the down arrow to highlight Edit Reminder, and press SELECT.
•Verify the
•The TV must be On at the scheduled time for
I set a show with the Power On TV option and it did not.
•Check the Schedule menu and verify that the show is listed as a Reminder.
•Highlight the show under Listings and do the following:
•Press the Menu button on the remote.
•Use the down arrow to highlight Edit Reminder, and press SELECT.
•Verify the Power On TV option reads Yes.
•The TV must be Off at the scheduled time for Power On TV.
If I add a recorder or change my cable service, how do I change my Setup information?
1)Highlight the Setup Service in the Guide.
2)Use the down arrow to select Change System Settings.
3)Follow the
A show entry in the Guide reads “No Listing.” What does that mean?
Show information for that entry was not available during the last Guide information update (download). Show information is updated on a daily basis.
When I entered the Guide, I was asked to choose from more than one channel lineup. What should I do?
Select the lineup that most closely matches the one for your area. If after you choose the lineup, you want to make changes:
1)Highlight the Setup Service in the Guide.
2)Use the down arrow to select Change Channel Display or change System Settings.
3)Follow the
What do the color for shows in the Listings and Search screens indicate?
Green=Sports; Dark Blue=Children’s; Purple=Movies; Teal=Other Show
If I have a power outage, do I need to complete Setup again?
No; Setup information is stored in TV Guide On Screen.
Is Help available in the Guide? If so, how do I find it?
Yes. Highlight any of the 4 main Services (i.e., Listings, Schedule, Setup, Search) and press the Info Button. An Expanded Info Box displays additional help information; press Info again to close the box.
Help is also available in a Panel Menu. Press the Info Button to display an Expanded Info Box; press Info again to close the box.
After some show titles, I have noticed from 1 to 4 stars (****). What does that mean?
These stars are a
I have seen the word “download” in reference to the Guide. What does that mean?
A download sends channel and show information to a TV Guide On Screen device. A download happens at least once a day.
Can I set a Record or Remind event without highlighting a show title in the Guide?
Yes. TV Guide On Screen has a Manual Record and Remind feature. Highlight Schedule and press menu. Choose the event type, press SELECT and then enter date, start and stop time, channel number, etc.
Useful Information
93