Crown CTS 2000, CTS 3000 Summary Specifications, Front Panel Indicators, Controls and Connectors

Page 41

`` SPECIFICATIONS

Summary Specifications

Frequency Response (at 1 watt, 20 Hz - 20

kHz): ±0.25dB.

Signal to Noise Ratio below rated full-band- width power, A-weighted: > 112 dB.

Total Harmonic Distortion (THD) at full rated power: < 0.1%.

Intermodulation Distortion (IMD) 60 Hz and

7 kHz at 4:1, from full rated output to –35 dB: < 0.2%.

Damping Factor (20 Hz to 100 Hz at 8 ohms): > 5000.

Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB.

Common Mode Rejection (CMR) (20 Hz to 1

kHz): > 70 dB typical.

Latency (analog, digital inputs): 1.13 mS analog, 1.81 mS digital (96 kHz).

A/D, D/A Converters: 24-bit 192 kHz Cirrus

Logic.

Digital Input: AES/EBU, 24-bit, 32-96 kHz. Onboard sample-rate converter.

Network: Onboard TCP/IQ and HiQnet, compat- ible with standard 100 Mb Ethernet hardware.

DSP: 24-bit conversion with 32-bit, floating- point DSP processing. World-class IIR and linear phase FIR filters. Has 64 assignable filters with 9 different filter types. Includes all-pass filters, over 2 seconds of delay available per channel, and dual uncorrelated-noise and sine- wave generators.

Load Impedance: (Note: Safe with all types of

loads) Stereo: 1/2/4/8/16 ohms. Bridge Mono: 2/4/8 ohms.

Input Sensitivity (referenced to 8 ohm rated output): Adjustable in 0.1V steps from 1.4V to 7.75V.

Required AC Mains: Universal AC input, 100- 240VAC, 50/60 Hz (±15%). Maximum AC mains voltage 277VAC.

AC Line Connector: Five cordsets supplied with amplifier (USA, UK, European, Australia, India).

Front Panel Indicators, Controls and Connectors

Indicators: Bridge mode, Ready, Signal level, Clip, Thermal error, Fault, Network data, Power, AC mains.

LCD Control Screen and Controls: These let

the user adjust the amplifier’s attenuation and

muting, configure the amp, set up and view

error monitoring (such as temperature and load supervision), set IP and HiQnet addresses from the front panel, and recall DSP presets. The presets allow the user to quickly reconfigure the amp for various applications.

Level Controls (Encoders): Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB. These two knobs affect the Channel-1 and Channel-2 output levels. They also select Menu items and adjust parameter values that are displayed on the LCD Control Screen.

Power Switch: Push-on/push-off switch with built-in green AC mains present indicator.

USB 2.0 Connector: Accepts a USB drive to transfer presets from the drive to the amplifier DSP, and vice versa.

Back Panel Connectors, Controls, and Indicators

Connectors: Balanced XLR analog inputs, bal- anced analog XLR loop-thru outputs, AES/EBU digital input, AES/EBU digital loop-thru output, 4-Pole Speakon output connectors, binding post output connectors, power cord, EtherCon® Ethernet connector for networking via HiQnet or CobraNet.

Reset Switch/Circuit Breaker: If the current draw of the amplifier exceeds safe limits, this breaker automatically disconnects the power supply from the AC mains. The switch resets the circuit breaker.

Preset Indicator: LED flashes to signal the number of the current preset if active. LED is green if the preset values have not been changed once loaded. LED is yellow if the preset values have been changed since they were loaded.

Construction

Cooling: Dual-zone, microprocessor controlled, continuously variable speed fans, front-to-back airflow.

Dimensions: 19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.2 in. (41.1 cm) D.

Weight: 28 lbs (12.7 kg) net, 36 lbs (16.3 kg) shipping.

Included Accessories: Rear rack ears, rack screws, operation manual, power cords, foam air filter.

Regulatory Certifications

Other Applications

12/08

141259-1

Crown continues the tradition of excellence and innovation with the Crown® I-Tech HD Series, delivering unmatched versatility, power and performance for touring sound applications. Featuring onboard high-definition BSS OMNIDRIVEHD™ DSP with 24-bit, 192 kHz Cirrus Logic SHARC A/D and D/A converters, the I-Tech HD Series also offers a new software interface that provides easier system- level changes, and includes a configuration wizard. Providing up to 9 kW continuous power in a 2U rack space and delivering the highest output voltage in the industry, the I-Tech HD Series outperforms all the

competition, even our own.

T O U R I N G

Image 41
Contents Crown Power Amplifiers Page Installed Sound 250W 200W 1,200W 1,200W‡000W Back Panel Controls and Connectors Front Panel Controls and IndicatorsOptions Protection Systems220W † Operation per channel-pair 100V direct outputs220W 250W † 440WVoltage Gain at maximum level setting, 1.4V sensitivity CobraNet audio Analog audio inputs allow CobraNet network audio input260W 180W 270W 220WOverall Audio Performance SwitchesGeneral 500W Configuration with HiQnetImpedances and outputs 200W 650WRear Panel Controls and Connectors Included AccessoriesPerformance ProtectionOne-touch Performance AC Line Current Signal to Noise Ratio below rated 8-ohm power at 1 kHzRegulatory Certifications Page Commercial Audio Adaptable Weight DimensionsOr 2 inputs 1 to 2 amplifier output channels Power ZoneCooling Optional AccessoriesShipping Weight 60W ChannelAC Voltage Tolerance +10%/-20% Crosstalk all controls at 10 -70 dB at 1kHz Load ImpedanceAny input can be sent to any output Priority muting PracticalStorage Temperature -20 C to 85 C THD Less than 0.5% at rated power at 1 kHzAmp Config Switch a DIP switch with two functions Input Sensitivity for full output at maximum gain135MA, 160MA Back Panel Controls, Connectors and Indicators 40W Music & PagingActive Indicator Illuminates when VOX ducking is active THD 0.5% at rated power at 1 kHzVcap remote volume control 22 lb 9.98 kgSingle-zone XM EnabledTEL Input Connector Transformer-isolated Output Volume Control Detented potentiometer with knobActive Indicator LED illuminates when VOX ducking is active Page Portable PA 200W 000W World-Class600W 100WVoltage Gain at 1kHz, 8 ohm rated output HiQnet USB Connector Type B, connects to a HiQnet networkOptional Accessory 050W InnovationControls IndicatorsPureBandTM Crossover System Input/Output000W ‡ Evolution500W ‡ Shipping Weight 74.0 lb 33.6 kg Page Touring 250W 000W High power density, up to 9000 watts in a 2U chassis500W 600W 000W 100W 500W 000WBack Panel Connectors, Controls, and Indicators Summary SpecificationsFront Panel Indicators, Controls and Connectors Macro-Tech i Series The Legend Continues Firmware/Software Back Panel Controls, Indicators and ConnectorsPage Recording & Broadcast 110W 80W Tried & True50W Frequency Response ±0.1 dB from 20 Hz to 20 kHz at 1watt Output SignalPage Cinema 450W N E M a Performance Monitor IEC AC Power Receptacle Connects to an CTs 2-Channel 260W 180W 220W CTs Multi-ChannelPage Networked Products & Accessories SmartAmp Automation for TCP/IQ SmartAmp Automation for Networked AudioOperation and helps to save both time and money Ethernet networkPIP USP4 Remote Level Control Wall-Mount ControllersChoosing the Right Module 170V Constant-Voltage TransformerCommercial Audio Accessories Accessories3PLUS3 3+3 Extended Warranty Cover your ampPage Product Applications & Warranty Page Page Accessories & Applications LIVE Sound Product Applications Crown Amplifier Warranty WORLDWIDE­EXCEPT USA & CANADA Summary of Warranty

CTS 600, CTS 1200, CTS 2000, CTS 3000 specifications

Crown, a leading name in material handling equipment, has developed the Crown CTS series, which includes the CTS 3000, CTS 2000, CTS 600, and CTS 1200 models. Each of these rugged machines is designed to enhance productivity and efficiency in various warehouse and distribution applications, integrating innovative technologies and robust features.

The Crown CTS 3000 is the flagship model in this series, designed for high-demand environments that require exceptional lifting capability. It boasts a powerful AC drive system that offers superior acceleration and speed control, providing operators with smooth and responsive handling. The heightened visibility from the operator's compartment minimizes blind spots, enhancing safety and efficiency during operations. The CTS 3000 also features advanced battery management technology, allowing for prolonged operation and minimal downtime.

Next in line is the Crown CTS 2000, which is tailored for a range of medium-duty applications. While its lifting capacity is slightly lower than the CTS 3000, it incorporates many similar functionalities. It features a user-friendly control interface, making it easy for operators of any skill level to manage tasks efficiently. The robust design ensures reliability and durability, making it an excellent choice for businesses that require consistent performance under moderately demanding conditions.

The Crown CTS 600 model is specially designed for light-duty operations. Ideal for shorter runs and smaller spaces, the CTS 600 is compact and maneuverable without compromising on performance. It comes equipped with advanced safety features, including an integrated operator presence system that ensures safe operation. The model’s light weight also translates into better battery efficiency, making it a cost-effective option for businesses seeking to optimize their operational expenses.

Lastly, the Crown CTS 1200 is a versatile model that strikes a balance between power and agility. It is particularly suitable for environments where space is at a premium. The CTS 1200 is engineered for versatility, allowing it to handle a variety of loads with ease. It features intuitive controls and exceptional ergonomics, contributing to operator comfort during long shifts. This model also emphasizes energy efficiency and reduced environmental impact through its advanced power management system.

In summary, the Crown CTS series offers a range of models catering to varying operational needs, from high-demand environments with the CTS 3000 to the space-saving capabilities of the CTS 600. Each model is built upon a foundation of advanced technologies that promote safety, efficiency, and productivity, making them indispensable tools in today's material handling landscape.