Crown CTS 600, CTS 3000, CTS 2000, CTS 1200 manual PIP USP4

Page 59

PIP USP4

The Crown® PIP-USP4 is a 4th generation DSP-based PIPTM (Programmable Input Processor) input module for CTs Series two channel amplifiers. The USP4 connects to an Ethernet network allowing it to be remotely controlled and monitored via System Architect. In addition, the USP4 allows the

transport of real-time digital audio via AES3, CobraNetTM or Ethernet AVB.

The USP4 is a HiQnetTM series component and connects to the audio control/ monitor network using 100Mb* Ethernet hardware (switches, Network Interface Cards, and cables). The CobraNet or Ethernet AVB audio signal is available over the same 100Mb* Ethernet network, providing a simple to install, single plug solution for audio distribution, control, and monitoring.

The USP4’s OMNIDRIVEHDTM processor gives the user an enormous amount of digital signal processing. LevelMAXTM limiters, proprietary FIR and IIR filters, audio routing, faders, meters, polarity & mute, compressors, delays, error reporting and load monitoring are all available. Built in noise and sine-wave generator provide noise masking and test capabilities. The enhanced AUX port allows users to interface with the USP4 to provide additional external control and monitoring.

Offering crisp clear sound and the widest dynamic range possible, the PIP- USP4 provides unprecedented power and flexibility in one compact—and very affordable—module.

The USP4 can be installed in any CTs two channel amplifier. The USP4 is available in either CobraNet or Ethernet AVB versions for digital audio transport; with both modules still having integrated AES3 transport. The USP4 requires Harman Pro System Architect software. The System Architect software is available at hiqnet.harmanpro.com.

FEATURES

•Ultra smooth processing by onboard high-definition BSS OMNIDRIVEHD DSP with 24-bit,192 kHz Cirrus Logic SHARC A/D and D/A converters and true 96 kHz processing

•World-class FIR and IIR filters

•LevelMAX™ peak, RMS and transducer thermal voltage power limiters combine for a smooth and accurate response, better sound, and higher usable SPL

•100Mb Ethernet single-plug solution for CobraNetTM audio, Ethernet AVB audio, and HiQnetTM control and monitoring

•Auto Standby for increased energy efficiency

•Multiple Input Options Include: Analog, CobraNetTM or Ethernet AVB, and AES3 Digital Audio

•Digital Audio On/Off Ramp allows users to send pre or post processed analog signal out of the module to adjacent amplifiers

•Amplifier output monitor using the Foldback control through either CobraNetTM or Ethernet AVB network

•SLM (Sweep Load Monitoring) with system-level diagnostics

•64 assignable filters with 9 different filter types including all-pass filters

•Over 4 seconds of delay available per channel

•Input compressors for each channel

•Full error reporting

•Firmware upgrades via the network

•50 user selectable presets

•Reliable FLASH memory backup of all parameters

•Ambient Leveler senses the ambient sound level of a room via the connected loudspeakers

•Over 2 seconds of delay available per channel.

•Input compressors and output limiters for each channel.

•Dual, uncorrelated noise generators for noise masking.

•Sine-wave generator.

•Load supervision.

•Full error reporting.

•Firmware upgrades via the network.

•10 user selectable presets.

•Reliable FLASH memory backup of all parameters.

N E T W O R K E D P R O D U C T S

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Crown Power Amplifiers Page Installed Sound 250W 200W 1,200W 1,200W‡000W Protection Systems Front Panel Controls and IndicatorsBack Panel Controls and Connectors Options440W Operation per channel-pair 100V direct outputs220W † 220W 250W †Voltage Gain at maximum level setting, 1.4V sensitivity 270W 220W Analog audio inputs allow CobraNet network audio inputCobraNet audio 260W 180WOverall Audio Performance SwitchesGeneral 200W 650W Configuration with HiQnet500W Impedances and outputsProtection Included AccessoriesRear Panel Controls and Connectors PerformanceOne-touch Performance AC Line Current Signal to Noise Ratio below rated 8-ohm power at 1 kHzRegulatory Certifications Page Commercial Audio Adaptable Weight DimensionsOr 2 inputs 1 to 2 amplifier output channels Power ZoneCooling Optional AccessoriesShipping Weight 60W ChannelAC Voltage Tolerance +10%/-20% Crosstalk all controls at 10 -70 dB at 1kHz Load ImpedanceAny input can be sent to any output Priority muting PracticalInput Sensitivity for full output at maximum gain THD Less than 0.5% at rated power at 1 kHzStorage Temperature -20 C to 85 C Amp Config Switch a DIP switch with two functions135MA, 160MA Back Panel Controls, Connectors and Indicators 40W Music & Paging22 lb 9.98 kg THD 0.5% at rated power at 1 kHzActive Indicator Illuminates when VOX ducking is active Vcap remote volume controlSingle-zone XM EnabledTEL Input Connector Transformer-isolated Output Volume Control Detented potentiometer with knobActive Indicator LED illuminates when VOX ducking is active Page Portable PA 100W World-Class200W 000W 600WVoltage Gain at 1kHz, 8 ohm rated output HiQnet USB Connector Type B, connects to a HiQnet networkOptional Accessory 050W InnovationInput/Output IndicatorsControls PureBandTM Crossover System000W ‡ Evolution500W ‡ Shipping Weight 74.0 lb 33.6 kg Page Touring 100W 500W 000W High power density, up to 9000 watts in a 2U chassis250W 000W 500W 600W 000WBack Panel Connectors, Controls, and Indicators Summary SpecificationsFront Panel Indicators, Controls and Connectors Macro-Tech i Series The Legend Continues Firmware/Software Back Panel Controls, Indicators and ConnectorsPage Recording & Broadcast 110W 80W Tried & True50W Frequency Response ±0.1 dB from 20 Hz to 20 kHz at 1watt Output SignalPage Cinema 450W N E M a Performance Monitor IEC AC Power Receptacle Connects to an CTs 2-Channel 260W 180W 220W CTs Multi-ChannelPage Networked Products & Accessories Ethernet network SmartAmp Automation for Networked AudioSmartAmp Automation for TCP/IQ Operation and helps to save both time and moneyPIP USP4 170V Constant-Voltage Transformer Wall-Mount ControllersRemote Level Control Choosing the Right ModuleCover your amp AccessoriesCommercial Audio Accessories 3PLUS3 3+3 Extended WarrantyPage Product Applications & Warranty Page Page Accessories & Applications LIVE Sound Product Applications Crown Amplifier Warranty WORLDWIDE­EXCEPT USA & CANADA Summary of Warranty

CTS 600, CTS 1200, CTS 2000, CTS 3000 specifications

Crown, a leading name in material handling equipment, has developed the Crown CTS series, which includes the CTS 3000, CTS 2000, CTS 600, and CTS 1200 models. Each of these rugged machines is designed to enhance productivity and efficiency in various warehouse and distribution applications, integrating innovative technologies and robust features.

The Crown CTS 3000 is the flagship model in this series, designed for high-demand environments that require exceptional lifting capability. It boasts a powerful AC drive system that offers superior acceleration and speed control, providing operators with smooth and responsive handling. The heightened visibility from the operator's compartment minimizes blind spots, enhancing safety and efficiency during operations. The CTS 3000 also features advanced battery management technology, allowing for prolonged operation and minimal downtime.

Next in line is the Crown CTS 2000, which is tailored for a range of medium-duty applications. While its lifting capacity is slightly lower than the CTS 3000, it incorporates many similar functionalities. It features a user-friendly control interface, making it easy for operators of any skill level to manage tasks efficiently. The robust design ensures reliability and durability, making it an excellent choice for businesses that require consistent performance under moderately demanding conditions.

The Crown CTS 600 model is specially designed for light-duty operations. Ideal for shorter runs and smaller spaces, the CTS 600 is compact and maneuverable without compromising on performance. It comes equipped with advanced safety features, including an integrated operator presence system that ensures safe operation. The model’s light weight also translates into better battery efficiency, making it a cost-effective option for businesses seeking to optimize their operational expenses.

Lastly, the Crown CTS 1200 is a versatile model that strikes a balance between power and agility. It is particularly suitable for environments where space is at a premium. The CTS 1200 is engineered for versatility, allowing it to handle a variety of loads with ease. It features intuitive controls and exceptional ergonomics, contributing to operator comfort during long shifts. This model also emphasizes energy efficiency and reduced environmental impact through its advanced power management system.

In summary, the Crown CTS series offers a range of models catering to varying operational needs, from high-demand environments with the CTS 3000 to the space-saving capabilities of the CTS 600. Each model is built upon a foundation of advanced technologies that promote safety, efficiency, and productivity, making them indispensable tools in today's material handling landscape.
Top Page Image Contents