Crown CTS 2000, CTS 3000, CTS 1200, CTS 600 manual IEC AC Power Receptacle Connects to an

Page 53

`` SPECIFICATIONS

Performance

Input Impedance (processor inputs): 10 kilohms.

Input Impedance (Processor Inputs): 10 k ohms.

Input Impedance (Power Amplifiers Inputs): > 50 k ohms.

Power Requirements: 100-240V ,50-60

Hz, 32 watts.

Front Panel Controls and Indicators

Channel Select Buttons and LEDs: Eight pushbutton switches, one for each input channel. Pressing a button monitors the signal from that channel, and lights the cor- responding LED. Any combination of eight channels can be selected.

Volume Control: Rotary potentiometer with knob controls the volume of the internal or external speaker. Has no effect on the VU Bargraph Meter display.

Processor/Amplifier Selector Switch and LEDs: Pushbutton switch with corresponding LEDs selects inputs from cinema procesor or power amplfiers for monitoring.

VU Bargraph Meter: 12-segment meter displays input level of selected channels from –40 VU to +3 VU. May be calibrated by the rear-panel trim adjustment. Operates inde- pendently of the Volume Control.

Test Jack: 1/4" phone jack lets the user moni- tor the audio output of the DSi-8M. Insert- ing a mono or stereo 1/4" phone plug here disables the internal speaker and routes the audio output to the Test Jack.

Internal Speaker: For convenenient monitor- ing at the monitor panel.

Power Switch and Power LED: Rocker switch turns power on or off. LED illuminates when power is on.

Rear Panel Controls and Connectors

IEC AC Power Receptacle: Connects to an

IEC AC power cord.

Input Connector 1: 10-pin Phoenix terminal block connects to the power amplifier speaker outputs for the Left Surround, Right Sur- round, Back Surround Left, Back Surround Right and Subwoofer channels. This connec- tor lets you monitor the output of amplifiers that do not include HD-15 connector options.

Input Connector 2: 10-pin Phoenix terminal block connects to the power amplifier speaker output for the Left High, Left Low, Center High, Center Low, Right High and Right Low channels. This connector lets you monitor the output of amplifiers that do not include HD-15 connector options.

Amplifier Level Control: Trimpot adjusts the level of the input signals from the power amplifiers.

Processor Level: Trimpot adjusts the level of the input signals from the processor.

Outputs to Power Amplifier Inputs: The six HD-15 connectors in this section connect to DSi amplifiers for both input and output signals. The HD-15 connectors have two functions:

1.Connect DSi 8M outputs to DSi amplifier inputs.

2.Connect DSi amplifier outputs to DSi 8M inputs for monitoring.

Using VGA cables, the HD-15 connectors can be connected to Crown DSi power amplifier HD-15 connectors as described below.

HD-15 Connector 1: For cinema I/O compat- ibility. Connects to Ls/Rs amplifier.

HD-15 Connector 2: Connects to Bsl/Bsr amplifier.

HD-15 Connector 3: Connects to Rl/Rh amplifier.

HD-15 Connector 4: Connects to Sw ampli- fier.

HD-15 Connector 5: Connects to Ll/Lh amplifier.

HD-15 Connector 6: Connects to Cl/Ch amplifier.

Optional Input Connector: 25-pinD-sub connector connects to the EX output of the processor.

Bargraph Level: Trimpot adjusts the sensitiv- ity of the front-panel VU Bargraph Meter.

Main Input Connector: 25-pinD-sub con- nector connects to the main outputs of the processor.

“EX” Selector Switch: 8-position DIP switch. Turn on switches 1-4 if system is without EX. Turn on switches 5-8 if system is with EX.

This routes the correct Ls/Rs inputs to the DSi-8M circuitry.

Construction

Chassis: Steel.

Dimensions: EIA Standard 19-inch rack mount width (EIA RS-310-B), 3.5 inches (8.9 cm) high and 9.625 inches (24.4 cm) deep behind front mounting surface.

Net Weight:

10 lb 2 oz (4.63 kg).

Shipping Weight:

16 lb (7.26 kg).

Regulatory Certifications

5/07

139623-2

The Crown® DSi-8M is a projection booth monitor designed to work with bi-amplified cinema systems using the Crown DSi Series amplifiers. All controls necessary for daily operation of the DSi-8M are easily accessible on the front panel. 8-channel monitoring allows you to moni-

C I N E M A

tor either the processor or the power amplifier’s outputs: L, C, R, Ls, Rs, Bsl, Bsr, and Sub in any combination. Input levels from the processor and power amplifier can be adjusted indepen- dently. There are no huge level jumps when switching between processor and power amplifiers. The bargraph display can be calibrated to the reference level for your theater. The projectionist can see auditorium levels instantly.

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Crown Power Amplifiers Page Installed Sound 250W 200W 1,200W 1,200W‡000W Back Panel Controls and Connectors Front Panel Controls and IndicatorsOptions Protection Systems220W † Operation per channel-pair 100V direct outputs220W 250W † 440WVoltage Gain at maximum level setting, 1.4V sensitivity CobraNet audio Analog audio inputs allow CobraNet network audio input260W 180W 270W 220WOverall Audio Performance SwitchesGeneral 500W Configuration with HiQnetImpedances and outputs 200W 650WRear Panel Controls and Connectors Included AccessoriesPerformance ProtectionOne-touch Performance AC Line Current Signal to Noise Ratio below rated 8-ohm power at 1 kHzRegulatory Certifications Page Commercial Audio Adaptable Weight DimensionsOr 2 inputs 1 to 2 amplifier output channels Power ZoneCooling Optional AccessoriesShipping Weight 60W ChannelAC Voltage Tolerance +10%/-20% Crosstalk all controls at 10 -70 dB at 1kHz Load ImpedanceAny input can be sent to any output Priority muting PracticalStorage Temperature -20 C to 85 C THD Less than 0.5% at rated power at 1 kHzAmp Config Switch a DIP switch with two functions Input Sensitivity for full output at maximum gain135MA, 160MA Back Panel Controls, Connectors and Indicators 40W Music & PagingActive Indicator Illuminates when VOX ducking is active THD 0.5% at rated power at 1 kHzVcap remote volume control 22 lb 9.98 kgSingle-zone XM EnabledTEL Input Connector Transformer-isolated Output Volume Control Detented potentiometer with knobActive Indicator LED illuminates when VOX ducking is active Page Portable PA 200W 000W World-Class600W 100WVoltage Gain at 1kHz, 8 ohm rated output HiQnet USB Connector Type B, connects to a HiQnet networkOptional Accessory 050W InnovationControls IndicatorsPureBandTM Crossover System Input/Output000W ‡ Evolution500W ‡ Shipping Weight 74.0 lb 33.6 kg Page Touring 250W 000W High power density, up to 9000 watts in a 2U chassis500W 600W 000W 100W 500W 000WBack Panel Connectors, Controls, and Indicators Summary SpecificationsFront Panel Indicators, Controls and Connectors Macro-Tech i Series The Legend Continues Firmware/Software Back Panel Controls, Indicators and ConnectorsPage Recording & Broadcast 110W 80W Tried & True50W Frequency Response ±0.1 dB from 20 Hz to 20 kHz at 1watt Output SignalPage Cinema 450W N E M a Performance Monitor IEC AC Power Receptacle Connects to an CTs 2-Channel 260W 180W 220W CTs Multi-ChannelPage Networked Products & Accessories SmartAmp Automation for TCP/IQ SmartAmp Automation for Networked AudioOperation and helps to save both time and money Ethernet networkPIP USP4 Remote Level Control Wall-Mount ControllersChoosing the Right Module 170V Constant-Voltage TransformerCommercial Audio Accessories Accessories3PLUS3 3+3 Extended Warranty Cover your ampPage Product Applications & Warranty Page Page Accessories & Applications LIVE Sound Product Applications Crown Amplifier Warranty WORLDWIDE­EXCEPT USA & CANADA Summary of Warranty

CTS 600, CTS 1200, CTS 2000, CTS 3000 specifications

Crown, a leading name in material handling equipment, has developed the Crown CTS series, which includes the CTS 3000, CTS 2000, CTS 600, and CTS 1200 models. Each of these rugged machines is designed to enhance productivity and efficiency in various warehouse and distribution applications, integrating innovative technologies and robust features.

The Crown CTS 3000 is the flagship model in this series, designed for high-demand environments that require exceptional lifting capability. It boasts a powerful AC drive system that offers superior acceleration and speed control, providing operators with smooth and responsive handling. The heightened visibility from the operator's compartment minimizes blind spots, enhancing safety and efficiency during operations. The CTS 3000 also features advanced battery management technology, allowing for prolonged operation and minimal downtime.

Next in line is the Crown CTS 2000, which is tailored for a range of medium-duty applications. While its lifting capacity is slightly lower than the CTS 3000, it incorporates many similar functionalities. It features a user-friendly control interface, making it easy for operators of any skill level to manage tasks efficiently. The robust design ensures reliability and durability, making it an excellent choice for businesses that require consistent performance under moderately demanding conditions.

The Crown CTS 600 model is specially designed for light-duty operations. Ideal for shorter runs and smaller spaces, the CTS 600 is compact and maneuverable without compromising on performance. It comes equipped with advanced safety features, including an integrated operator presence system that ensures safe operation. The model’s light weight also translates into better battery efficiency, making it a cost-effective option for businesses seeking to optimize their operational expenses.

Lastly, the Crown CTS 1200 is a versatile model that strikes a balance between power and agility. It is particularly suitable for environments where space is at a premium. The CTS 1200 is engineered for versatility, allowing it to handle a variety of loads with ease. It features intuitive controls and exceptional ergonomics, contributing to operator comfort during long shifts. This model also emphasizes energy efficiency and reduced environmental impact through its advanced power management system.

In summary, the Crown CTS series offers a range of models catering to varying operational needs, from high-demand environments with the CTS 3000 to the space-saving capabilities of the CTS 600. Each model is built upon a foundation of advanced technologies that promote safety, efficiency, and productivity, making them indispensable tools in today's material handling landscape.
Top Page Image Contents