Magnavox 27TP83 C101 owner manual =888

Page 18

yV u can view the playback of

CR tapes (Video Disc

Players, camcorders, etc). by using the AUDIO and VIDEO

INPUT jacks (on the rear of the

TV).

For example: to view the playback of a VCR tape:

_,,_ Connect the VIDEO and AUDIO IN(put) jacks on the TV to the AUDIO and VIDEO OUT(put) jacks on the VCR.

_ Press the MENU (M) button

PICTURE AND SOUND FROM

PLAYBACK OF VCR TAPE

RCA PHONO PLUG

j CABLF_ (NOT

SUPPLIED)

,on the remote, then press the MENU • or • buttons to select the word INPUT with the TV's on-screen arrow.

Note: You can press the

CHANNEL •• buttons to

.select "VCR/AUX" (if it has been added to the TV's channel memory.) See page 7 for details.

_._ Press the (+) button to select

the VCR/AUX(iliary) INPUTS -_ on the rear of the TV.

4_ Turn the VCR ON and

PLAY the VCR tape to be

viewed on the TV.

O

gh using the A/V INPUT jacks, return the INPUT display screen on the TV to ANTENNA.

If you leave the TV in the VCR/AUX INPUT mode and there is no signal source connected to the jacks, you will be seeing only a blank screen on the TV.

NOTE: If you have a mono (single audio OUTPUT) VCR, "Y" Connectors are available (from your dealer or Parts Information Center 1 800 292-6066) to connect to the audio inputs on the TV.

pup

=888

(RED_HrrE)[

VIDEO IN

(YELLOW)

_OFVCR

VCR

(EQUIPPED WITH VIDEO AND AUDIO OUTPUT JACKS)

NOTE: THE "TV/VCR" B_N

CAN ALSO BE USED TO PLACE

THE TV IN EITHER VCR/AUX OR

S-VIDEO MODES (AS WELL AS

SELF_,C_ CHANNELS 3 OR 4.)

Image 18

Contents Color Television Cong tu,ationspurch--, Magnavox SAFETYINSTRUCTIONS- Read before operating equipment Selecting the PIP Picture Source Using the PIP Feature Connections 30-31Picture-in-Pictore General InformationTry it out. Press AreaPress the Menu M button Word Program withPress the + button on the TVI Press the Menu or Buttons or Channel Number Channel you want to Save orRead the voice content On. O Thescreen Surf To Use 2Press the Menu M button on the remote, then press the Menu Message will appear on-screen when888 Press to Press * to Press Menu M button on the remote, then press the Menu Press Menu M button onPress the + button on Page Press the + button to turn Press Status button to clear the screenNumber appear on-screen TV to the R and L Audio Input OFF=888 Gdg Tape and Play the VCR in a normal mannerPress the Power button on the set to turn the TV on Information Press the Smart button on the remote AlTOW Does the remote turn the VCR Press the Power buttonPress the VCR System If YES, l and try the other4j Point the remote at the VCR. Press the Power button on Please read through steps 1-4 before beginningOn the following Continue to nextTo ,thatyouhaw lookedup Press and release the RECO91 Remote sensor window when Pressing buttons Power BoRonPoint the top of the remote Continue to nextpage Select the channel on the VCR to view in the PIP window Input control is set toMain screen picture so that sound can be heard Window Press the PIP Size button toOn the rear of the TV. The PIP Press the + button to selectConverter to the ANT. in on Work Allows for stereo sound to be transmittedwith the TV picture Ilugarmtscercanode losabajoindicados Connecticut-RhodeIsland Springfield,MA Area BlueHillsAvenue Color Television Audio/VideoRemote