Magnavox 27TP83 C101 owner manual To ,thatyouhaw lookedup, Press and release the REC

To ,thatyouhaw lookedup

IYth e two-digit Remote Code Number for your brand of Cable

Converter (on previous page),

you are ready to follow the four simple steps below.

Please read through steps 1.4 before beginning.

1_ Press and release the REC

(RECORD) button.

2_ Within thirty seconds after releasing the REC button, press and release the CBL System button.

3_,,'_ Within thirty seconds after releasing the CBL System button, ENTER THE TWO DIGIT CODE NUMBER for the desired Converter. The remote is now ready to send commands to the Converter.

.,_ Point the remote at the Converter. Press the POWER

button on the remote to turn the Converter ON.

O

Try it out. The Channel and POWER buttons on the

remote should now operate the Converter.

Remember, if this doesn't work

the first time, repeat steps using the same remote code number.

If after a second try the remote does not operate your Converter, and there are more code numbers listed for your brand Converter, use the next listed code number.

If after repeated attempts the code number method does not work your Converter, try the

"CONVERTER SEARCH" method on page 28.

Cable Convener