Magnavox 27TP83 C101 owner manual Select the channel on the VCR to view in the PIP window

F _Tow that you have completed

• ¥ the required connections on the previous page you are ready to follow the simple steps shown below.

_Turn the VCR and TV ON.

Place the VCR in the TV mode - Use the TV/VCR button on the VCR (or on the TV remote

if it is set to work your VCR - see page 24.)

Place the TV's PIP INPUT control to "VCR/AUX" -

Press MENU • or • on the

TV (or on the remote press M button and then M •g

buttons.)

Select the word PIP INPUT with the TV's on-screen Arrow. Then press the (+) button to select VCR/AUX.

Make sure the TV's "INPUT" on-screen control is set to

ANTENNA.

<,_ Select the channel on the VCR to view in the PIP window.

Select the channel on the TV to view on the main screen.

_ Press the PIP ON/OFF button on the remote.

The PIP window should show in one of the comers of the TV screen.

O

Remember, if you see the same picture on the main

screen and in the PIP window, you need to be sure the TV's PIP

INPUT control is set to

"VCR/AUX."

No sound will be heard with the PIP picture. See page 32 on how to 'SWAP" the PIP picture with

the main screen picture so that sound can be heard.

Also, see the following page on how to operate other PIP features

[ 12:00""

VCR IN "IV MODE"

(VCR Indicator Light will go out)

VCR - FOR PIP CHANNEL

VCR

SELECTED

CHANNEL

"IV

SE_D

CHANNEL

front of the VCR when pressing

BeVCRsurefunctionto pointbuttonsthe remoqe. at tl_

PIP INPUT CONTROL SET TO "VCR/AUX"

TV - FOR MAIN SCREEN CHANNEL

P

31