Magnavox 27TP83 C101 owner manual Converter to the ANT. in on

Page 34

IConverter Box and VCR.

_ DIP hookup with Cable

_,_ First use an optional signal splitter and connect the original

cable TV signal to both the

CABLE IN on the Cable Converter and the ANTENNA plug on the rear of the "IV.

_._ Connect the CABLE OUT on

the VCR.

the Converter to the ANT. IN on

_._ Connect the VIDEO OUT jack on the VCR to the VIDEO IN jack on the TV.

Also connect the AUDIO OUT (R and L) jacks from the VCR to the ,AUDIO IN jacks on the TV.

A

IJ

CONNECT TO TV

ANTENNA/CABLE INPUT PLUG

VIDEO IN

(YELLOW)

REAR OF TV

RCA PHONO PLUG

CABLES (NOT

SUPPLIED)

Remember, !

to use the Cable TV Converter Box to select channels for PIP, the VCR must be set to the same channel as the channel selection switch on the rear of the Cable Converter (either channel 3 or 4).

®@

@@

IN

Contact	the	Parts
Information		Center
I 800 292-6066			VCR
to order	any optional
acc..cssories

..L

CABLE TV CONVERTER

34

Image 34

Contents Color Television Cong tu,ationspurch--, Magnavox SAFETYINSTRUCTIONS- Read before operating equipment Selecting the PIP Picture Source Using the PIP Feature Connections 30-31Picture-in-Pictore General InformationTry it out. Press AreaWord Program with Press the Menu M buttonPress the + button on the TVI Press the Menu or Buttons or Channel Number Channel you want to Save orRead the voice content On. O Thescreen Surf To Use 2Press the Menu M button on the remote, then press the Menu Message will appear on-screen when888 Press to Press * to Press Menu M button on Press Menu M button on the remote, then press the MenuPress the + button on Page Press Status button to clear the screen Press the + button to turnNumber appear on-screen TV to the R and L Audio Input OFF=888 Gdg Tape and Play the VCR in a normal mannerPress the Power button on the set to turn the TV on Information Press the Smart button on the remote AlTOW Does the remote turn the VCR Press the Power buttonPress the VCR System If YES, l and try the other4j Point the remote at the VCR. Press the Power button on Please read through steps 1-4 before beginningOn the following Continue to nextTo ,thatyouhaw lookedup Press and release the RECO91 Power BoRon Remote sensor window when Pressing buttonsPoint the top of the remote Continue to nextpage Input control is set to Select the channel on the VCR to view in the PIP windowMain screen picture so that sound can be heard Window Press the PIP Size button toOn the rear of the TV. The PIP Press the + button to selectConverter to the ANT. in on Work Allows for stereo sound to be transmittedwith the TV picture Ilugarmtscercanode losabajoindicados Connecticut-RhodeIsland Springfield,MA Area BlueHillsAvenue Color Television Audio/VideoRemote