Point the top of the remote, Power BoRon

_wen using the TV remote ith a VCR, first make

certain it is set to control your VCR ( by the REMOTE CODE or SEARCH method - see earlier

section).

Press the VCR System

button on the remote.

Point the top of the remote

toward the front of the VCR

(remote sensor window) when

pressing buttons.

Record Button

Hold the RECORD button down, and then press the PLAY button to begin

a VCR recording.

Rewind Button

Press to rewind tapes. For some

VCRs you may need to press STOP

button first then REWIND. In

playback mode. hold button down to

view picture moving rapidly in reverse.

Pause Buttpn

Press to temporarily stop the tape dur- ing a playback or recording. Press again to release Pause.

TV-VCR Button

Press to the VCR position ('NCR" indicator on the VCR will light) to view the playback of a tape. Press again to place in the "IVposition ('WCR" indicator on the VCR will go OFF) to view one program while recording another program.

When used with the "IV the TV/VCR button works as a source button. Each press cycles the TV between channels 3 and 4; or the VCR/AUX and S-VIDEO Input modes. It is a quick one-button way to select these channels and modes (without directly entering the TV's Menu system.)

Press to playback a tape. Hold down after pressing the RECORD button to start a recording.

		-Stop Button
		Press to stop the tape.
		k__Fast Forward Button
		Press to rapidly advance the tape. For
		some VCRs you may need to press
		STOP first then FF. In Playback
		mode hold button down to view the
		picture moving rapidly in the forward
(ON/OFF[] POSIm SWAPill	FREEZE)	Ldirection.	Scan Button_
		.Channel	Scan Button_
PIP _-_--_.Z	size)	Press to scan up or down through
		VCR channel numbers.
		Number	Buttons
		Press buttons for direct VCR channel
		selections.

VCR System Button

Press to send remote commands to

the VCR.

Power BoRon

Press to turn the VCR ON and OFF.

Remember, the VCR

abuttons on the remote will not operate your VCR if those features are not already found on your VCR remote control.

Note: All VCR functions (particularly Search, Rewind, Fast Forward, etc.) will operate the same as with the original VCR remote control provided with the VCR.