OTE: If you went through tup (in your Quick Use
Guide), this task has already been completed for you.
Your TV can automatically set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CH(annel)
•• buttons are pressed.
_) Press the MENU (M) button
on the remote, then press the MENU • or • buttons to select
the word PROGRAM with the
TV's
_,_ Press the (+) button (on the TVI
or the remote) to PROGRAM.
_.,_ Press the (+) button again to start the TV search for area
channels.
Flashing channel numbers will
count upward on the screen as the TV looks for channels to "ADD".
Press any button (on the TV or remote) to stop the channel search at any time. When the channel search is completed the TV will return to the last viewed channel.
Press STATUS button to clear
rthescreen
Try it out. Press
CHANNEL AT buttons and
see which channels have been added.
Remember, if you want to drop any unwanted channels from the TV's
memory, see the next page on how to "Manually" add and delete channels.
Note: As the TV searches for channels to "ADD" into memory the
[ _peration and does not indicate a l eed for service.
PRESS ÷ TO
AUTO PROGRAI_I
CHANNELS
"RED" channel numbe_ have been added to the 'IV's memory.
"WHITE" channel numbers are not present in the TV's program memory.
888
until the search for channels is
I donehe .TV screen will be blocked off