Chapter 5
Using the Remotes
Controlling the TV
Press the Local TV button, the remote will now control the TV. The remote automatically tunes the TV in front of you to your favorite TV channel.
To set your favorite TV channel:
•Press "Local TV" (to control the TV in front of you).
•Enter a two digit channel number (which the remote will send to the TV as usual, tuning it to your favorite channel).
•Press "Local TV". The remote will remember the favorite channel and will tune the TV to that channel anytime you press "Local TV".
Controlling the Red Channel
Press the Red button, the remote will now control the device connected to the Red channel of the Xtender and command the TV in front of you to change to the channel that Red is on – Red might be on any channel that you or your installer set
–so make sure you keep the remote pointed at the TV until it gets to the new channel.
Controlling the Green Channel
Press the Green button, the remote will now control the device connected to the Green channel of the Xtender.
Controlling the Blue Channel
Press the Blue button, the remote will now control the device connected to the Blue channel of the Xtender.
Note: When controlling one of the Red/Green/Blue channels, the Vol+/- and Mute buttons still control the TV.
Using the Power button
Normally, the Power button always controls the TV. However the power on a device connected to the Red, Green, or Blue channel of the Xtender can be controlled by following this procedure:
•Press the Red, Green, or Blue button corresponding to the device you want to power on or off.
•Within 10 seconds after pressing the Red, Green, or Blue button, press the Power button.
Controlling the Local Devices
If you want to use the remote to control one of the other devices in front of you, press "CBL", "AUX", or "DVD". Once you press one of these buttons, the remote will continue to control the device you selected until you press Local TV, Red, Green, or Blue again.
Buttons will Illuminate
Programming the Remotes | 28 |