Epson Bocs Blue Channel Set Up, Connecting Xtender’s Power Supply, Checking Power Supply

Locate the IR window on the device that you have plugged into the Green Channel. Peel the back off of the tape on the other end and stick it over the IR window of the audio/video device you previously plugged into the Green Channel input.

Blue Channel Set Up

ƒDefault DVD Player/Changer

Connect the Device to the Xtender

As an example, we will connect a DVD player to the Blue Channel.

Repeat the same steps as the Red Channel. That is, connect your DVD device to Xtender by plugging the Audio/Video connectors from the audio/video outputs on the DVD player to the inputs on Xtender’s Blue Channel.

Connect the “IR Blaster”.

Repeat the same steps as the red channel by connecting the IR blaster to the IR window on the device you are plugging into the Blue Channel

Connecting Xtender’s Power Supply

Locate the power supply that came with Xtender. Plug power supply into “Power” on the back panel of Xtender. Plug the power supply into a wall outlet or plug strip.

Checking Power Supply

•Check that the Xtender power lights are on

Optional – Connect to the local TV

Xtender’s job is to connect the rest of the TVs in your home to your stack of A/V equipment, and as previously described, you might very well have moved your equipment to some out-of-the-way location. If, however, your Xtender is now sitting next to a TV, that TV needs to get connected.

Installing the Xtender 17