Epson Bocs installation manual What’s on the Front Panel?

What’s on the Front Panel?

1

1. Learning Window

2 3

Xtender has the ability to learn remote control codes just in case you can’t find one in our remotes that works. There is a simple procedure to follow in the “Programming the Remote” section. This window is where you point your remote control during that process to allow Xtender to learn to control things that are plugged into it.

2. Xtender Activity Lights	These lights flash when anyone in the home is
	controlling an Xtender channel with a wireless
	remote control. The Red light flashes when using the
	Red channel, Green for green channel, and Blue for
	blue channel. All of the lights glow when Xtender is
	on, and they all flash together when you are pairing
	a remote to Xtender.
3. Remote “Pair” Button	Each Xtender remote control must be paired to an
	Xtender – this prevents your remotes from
	controlling your neighbor’s Xtender as well as the
	other way around. If you buy an extra remote or one
	of your remotes needs to be re-paired, just press
	this button then hold down the “Menu” and
	“Channel +” buttons on the remote you would like to
	pair.

Welcome 6