Fujitsu P42HHA10E Watching Pictures on the Wide Screen, Switching Between Screen Sizes, Press

Page 22

WATCHING PICTURES ON THE WIDE SCREEN

SWITCHING BETWEEN SCREEN SIZES

*You can also use the buttons on the display’s control panel to perform these steps.

1

2

Press .

The currently selected mode will appear.

Press to select a desired picture mode.

Each time you press , a different picture mode appears. The sequences used are as follows:

When you are in a Video or S-video input mode

When you are in a Comp.video input mode

When you are in an RGB input mode

*Depending on the type of signal, some aspects may not be selected.

Normal mode

Wide1 mode

Note

Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.

A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio.

Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purposes or for a public audience may constitute a copyright infringement.

For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.

Reference

See P. E-28–E-29 for how to adjust the picture size and position.

DownloadedE-22FromTV-Manual.com Manuals

Image 22
Contents USER’S Manual Important Safety Instructions Safety PrecautionsImportant Information Power cord Power supply voltage Features Handy Tips AccessoriesChecking Accessories InformationInstallation ReferenceDisplay Section Front Part Names and FunctionsControl Panel Right side of display Display Section Lower Part VideoboardPin No Signal Pin No Input signalDescription of Input Terminals Remote Control Putting Batteries in the Remote Control Using the Remote ControlPrecautions Display side Effective Range for the Remote ControlDisplay front Ferrite cores Connecting the Display to External EquipmentReceptacle Two big ferrite coresVCR or other external components See P Speaker Display Speaker optional Remote controlExample of Connection to External Components VCR E-15 Satellite tuner E-17VCR To Scart output To Scart inputConnecting the Display to External Equipment DVD PlayerSatellite Tuner An example of the underside of the displayConnecting the Display to External Equipment Adjusting the Volume Turning the Power on and OFFBasic Operations RGB Input Mode Selecting Input ModeVideo Input Mode Press the buttons to select the input modeConvenient Functions Picture Mode Picture ModeOther Basic Operations On-screen information DisplayNormal mode Wide1 mode Switching Between Screen SizesPress to select a desired picture mode Watching Pictures on the Wide ScreenScreen Size Aspect RatioAdjustment Menu Adjustment MenuAdjusting Pictures Picture Menu Setting Picture Mode Picture Mode Precision Setting for more advanced adjustmentCase of Load Setting Noise Reduction Noise ReductionStoring the setting of Picture Picture Memory Case of SavePress Change position values Position adjustment screenPress To select POSITION/SIZE selected from the main menu screenSetting Range Adjusting Screen Position PositionAdjusting Screen Size Size Video, S-video mode Comp.video modePress or to select Audio Adjusting Audio Audio MenuPress To adjust Balance Press or to select BalanceAdjusting Volume Balance Balance Adjusting Treble TrebleAdjusting Bass Bass Setting Loudness LoudnessPress or to select On Screen Menu Other Adjustments Features MenuPress or to select Features Press or to select LanguageAdjustment Features setup screen has the following 5 optionsFunction On Screen MenuVideo Format Setting the Input TerminalsVideo Input when the P-TE1000E is installed Function MaskBNC Input Video Input when the P-TE1010E is installedBNC-Input selection screen RGB-PC Decoder SUB InputDVI Input SUB Input selection screenAudio Input Other SettingsDPMSfor other than RGB1 Black WhiteScreen Orbiter setting screen Minimizing phosphor burn-in Screen Orbiter For RGBDisplaying white over entire screen White Screen Specifying RGB Input Signal Code Setting For RGB2, RGB3Setting Exhibition Mode Exhibition Mode Displaying System Status InformationPress or to select the Yes Press or to select Factory DefaultFactory Default selected in the main menu screen Displays the message of having completed the initializationOptions Installation Connecting the signal input cableFactory Settings DVI-DSpecification ModelSpecification Problem Action Cleaning and MaintenanceHandy Tips