Fujitsu P42VHA20E, P-TE1000E Other Settings, DPMSfor other than RGB1, Audio Input, Black White

Page 38

OTHER ADJUSTMENTS (FEATURES MENU) (Continued)

OTHER SETTINGS

DPMSfor other than RGB1

You can use this option to select the amount of time before the DPMS function starts.

DPMS (which stands for “display power management signaling”) allows the display to maintain an automatic power saving function.

This function causes on-screen information to disappear until the next input operation, if the power is ON and the display has not received any signals for the predetermined period of time. When DPMS is active, the power indicator lamp turns orange.

(1) Select DPMS and press . DPMS screen appears.

(2)Press or to select Time.

(3)Each time you press or , one of the available choices appears in the following sequence:

Off:	Disables DPMS
Number:	Approximate time before DPMS starts. (Unit: minutes)

*The power indicator lamp turns orange while the DPMS is ON.

*The power turns ON automatically when the display receives a signal.

(4) Can specify background colour.

Press or to select background colour.

Each time you press or , one of the available choices appears in the following sequence:

Black White

Black: Mutes images in Black background.

White: Mutes images in White background.

*Switches approx. 20 seconds after the display stops receiving signals.

(5) Press

to store.

• Audio Input

You can use this option to select one of the three available terminals to receive sound from input equipment.

(1) Select “Audio Input” and press .

The “Audio Input” selection screen will appear.

(2)Press or to select input equipment.

(3)Select a desired input terminal.

Each time you press or , one of the available choices appears in the following sequence:

No audio: No sound in the corresponding mode.

Audio 1-4: Selects Audio 1 through 4 for receiving sound in the corresponding mode.

*You can select Audio4 when P-TE1000E is installed.

*Repeat steps (2) and (3) for each piece of input equipment.

(4) Press to store.

*Audio Input menu will not be displayed when “No Audio” is selected.

DPMS selection screen

“Audio Input” selection screen

DownloadedE-38FromTV-Manual.com Manuals

Image 38

Contents USER’S Manual Important Information Safety PrecautionsImportant Safety Instructions Power cord Power supply voltage Features Handy Tips AccessoriesChecking Accessories InformationInstallation ReferenceControl Panel Right side of display Part Names and FunctionsDisplay Section Front Display Section Lower Part VideoboardDescription of Input Terminals Pin No Input signalPin No Signal Remote Control Precautions Using the Remote ControlPutting Batteries in the Remote Control Display front Effective Range for the Remote ControlDisplay side Ferrite cores Connecting the Display to External EquipmentReceptacle Two big ferrite coresVCR or other external components See P Speaker Display Speaker optional Remote controlExample of Connection to External Components VCR E-15 Satellite tuner E-17VCR To Scart output To Scart inputConnecting the Display to External Equipment DVD PlayerSatellite Tuner An example of the underside of the displayConnecting the Display to External Equipment Basic Operations Turning the Power on and OFFAdjusting the Volume RGB Input Mode Selecting Input ModeVideo Input Mode Press the buttons to select the input modeConvenient Functions Picture Mode Picture ModeOther Basic Operations On-screen information DisplayNormal mode Wide1 mode Switching Between Screen SizesPress to select a desired picture mode Watching Pictures on the Wide ScreenScreen Size Aspect RatioAdjustment Menu Adjustment MenuAdjusting Pictures Picture Menu Setting Picture Mode Picture Mode Precision Setting for more advanced adjustmentCase of Load Setting Noise Reduction Noise ReductionStoring the setting of Picture Picture Memory Case of SavePress Change position values Position adjustment screenPress To select POSITION/SIZE selected from the main menu screenSetting Range Adjusting Screen Position PositionAdjusting Screen Size Size Video, S-video mode Comp.video modePress or to select Audio Adjusting Audio Audio MenuPress To adjust Balance Press or to select BalanceAdjusting Volume Balance Balance Adjusting Treble TrebleAdjusting Bass Bass Setting Loudness LoudnessPress or to select On Screen Menu Other Adjustments Features MenuPress or to select Features Press or to select LanguageAdjustment Features setup screen has the following 5 optionsFunction On Screen MenuVideo Format Setting the Input TerminalsVideo Input when the P-TE1000E is installed Function MaskBNC-Input selection screen Video Input when the P-TE1010E is installedBNC Input RGB-PC Decoder SUB InputDVI Input SUB Input selection screenAudio Input Other SettingsDPMSfor other than RGB1 Black WhiteScreen Orbiter setting screen Minimizing phosphor burn-in Screen Orbiter For RGBDisplaying white over entire screen White Screen Specifying RGB Input Signal Code Setting For RGB2, RGB3Setting Exhibition Mode Exhibition Mode Displaying System Status InformationPress or to select the Yes Press or to select Factory DefaultFactory Default selected in the main menu screen Displays the message of having completed the initializationOptions Installation Connecting the signal input cableFactory Settings DVI-DSpecification ModelSpecification Handy Tips Cleaning and MaintenanceProblem Action