OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
•Video Input (when the P-TE1010E is installed)
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal. Each time you press 
or 
, one of the available modes appears in the following sequence:
Auto1: Automatically selects NTSC, PAL and SECAM.
Auto2: Automatically selects NTSC and
Other than Auto: You need to select a system appropriate to the input signal.
Press 
to store.
•
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal. Each time you press 
or 
, one of the available modes appears in the following sequence:
Auto1: Automatically selects NTSC, PAL and SECAM.
Auto2: Automatically selects NTSC and
Other than Auto: You need to select a system appropriate to the input signal.
Press 
to store.
•BNC Input
You can use this option to select the signal system it will receive to BNC Input terminal.
(1)Select BNC Input and press 
. BNC Input screen appears.
(2)Select the signal system to receive.
Each time you press 
or 
, one of the available choices appears in the following sequence:
Comp.video: For using colour difference input.
| For using PC wih RGB signal input. |
Decoder: | For using decoder with RGB signal input. |
(3)Press 
or 
to select Mask.
(4)Select Comp.video,
Each time you press 
or 
, one of the available choices appears in the following sequence:
“BNC-Input” selection screen
23456789012345678901234567890This fringe part is masked.
Off: | Does not mask. |
Number:Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.
(5) Press 
to store.