Fujitsu P42HHA10E, P-TE1000E, P-TE1010E DVI Input, RGB-PC Decoder, SUB Input selection screen

Page 37

•D-SUB Input

You can use this option to select the signal system it will receive to D-SUB Input terminal.

(1)Select D-SUB Input and press . D-SUB Input screen appears.

(2)Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

RGB-PC Decoder

RGB-PC: For using RGB for PC.

Decoder: For using digital broadcast tuner.

(3)Press or to select Mask.

(4)Select Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

Off:	Does not mask.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.

(5) Press to store.

•DVI Input

You can select the signal method input to the DVI input terminal. Each time or is pressed, the setting is changed.

DVI1 DVI2

DVI1:	Used when connecting to a PC.
DVI2:	Used when connecting to a DVD player or digital tuner.
Press	to store.

* Set according to the signal method before connecting peripheral device.

“D-SUB Input” selection screen

23456789012345678901234567890This fringe part is masked.

English

* On-screen information disappears if you do not take any action for about 60 seconds.

Downloaded From TV-Manual.com Manuals

E-37

Image 37

Contents USER’S Manual Important Safety Instructions Safety PrecautionsImportant Information Power cord Power supply voltage Features Checking Accessories AccessoriesHandy Tips InformationReference InstallationDisplay Section Front Part Names and FunctionsControl Panel Right side of display Videoboard Display Section Lower PartPin No Signal Pin No Input signalDescription of Input Terminals Remote Control Putting Batteries in the Remote Control Using the Remote ControlPrecautions Display side Effective Range for the Remote ControlDisplay front Receptacle Connecting the Display to External EquipmentFerrite cores Two big ferrite coresExample of Connection to External Components Speaker Display Speaker optional Remote controlVCR or other external components See P VCR E-15 Satellite tuner E-17To Scart output To Scart input VCRDVD Player Connecting the Display to External EquipmentAn example of the underside of the display Satellite TunerConnecting the Display to External Equipment Adjusting the Volume Turning the Power on and OFFBasic Operations Video Input Mode Selecting Input ModeRGB Input Mode Press the buttons to select the input modeOther Basic Operations Picture Mode Picture ModeConvenient Functions On-screen information DisplayPress to select a desired picture mode Switching Between Screen SizesNormal mode Wide1 mode Watching Pictures on the Wide ScreenAspect Ratio Screen SizeAdjustment Menu Adjustment MenuAdjusting Pictures Picture Menu Precision Setting for more advanced adjustment Setting Picture Mode Picture ModeStoring the setting of Picture Picture Memory Setting Noise Reduction Noise ReductionCase of Load Case of SavePress To select Position adjustment screenPress Change position values POSITION/SIZE selected from the main menu screenAdjusting Screen Size Size Adjusting Screen Position PositionSetting Range Video, S-video mode Comp.video modePress To adjust Balance Adjusting Audio Audio MenuPress or to select Audio Press or to select BalanceAdjusting Bass Bass Adjusting Treble TrebleAdjusting Volume Balance Balance Setting Loudness LoudnessPress or to select Features Other Adjustments Features MenuPress or to select On Screen Menu Press or to select LanguageFeatures setup screen has the following 5 options AdjustmentOn Screen Menu FunctionVideo Input when the P-TE1000E is installed Function Setting the Input TerminalsVideo Format MaskBNC Input Video Input when the P-TE1010E is installedBNC-Input selection screen DVI Input SUB InputRGB-PC Decoder SUB Input selection screenDPMSfor other than RGB1 Other SettingsAudio Input Black WhiteMinimizing phosphor burn-in Screen Orbiter For RGB Screen Orbiter setting screenSetting Exhibition Mode Exhibition Mode Specifying RGB Input Signal Code Setting For RGB2, RGB3Displaying white over entire screen White Screen Displaying System Status InformationFactory Default selected in the main menu screen Press or to select Factory DefaultPress or to select the Yes Displays the message of having completed the initializationOptions Connecting the signal input cable InstallationDVI-D Factory SettingsModel SpecificationSpecification Problem Action Cleaning and MaintenanceHandy Tips