Fujitsu P42VHA20E Receptacle, Connecting the Display to External Equipment, Ferrite cores

Page 13

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Be sure to turn OFF the power to the display and external equipment before making any connections.

No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information.

RECEPTACLE

Make sure that the power cable’s grounding wire is grounded.

The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information.

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Carefully check the terminals for position and type before making any connections.

Loose connectors can result in picture or colour problems. Make sure that all connectors are securely inserted into their terminals.

Ferrite cores

These ferrite cores are used to attenuate undesired signals.

Two big ferrite cores

When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.

Power Cable	RS-232C Cable

Ferrite Core	Ferrite Core

Two small ferrite cores

When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.

Ferrite Core

Ferrite Core

English

Downloaded From TV-Manual.com Manuals

E-13

Image 13

Contents USER’S Manual Important Safety Instructions Safety PrecautionsImportant Information Power cord Power supply voltage Features Checking Accessories AccessoriesHandy Tips InformationReference InstallationDisplay Section Front Part Names and FunctionsControl Panel Right side of display Videoboard Display Section Lower PartPin No Signal Pin No Input signalDescription of Input Terminals Remote Control Putting Batteries in the Remote Control Using the Remote ControlPrecautions Display side Effective Range for the Remote ControlDisplay front Receptacle Connecting the Display to External EquipmentFerrite cores Two big ferrite coresExample of Connection to External Components Speaker Display Speaker optional Remote controlVCR or other external components See P VCR E-15 Satellite tuner E-17To Scart output To Scart input VCRDVD Player Connecting the Display to External EquipmentAn example of the underside of the display Satellite TunerConnecting the Display to External Equipment Adjusting the Volume Turning the Power on and OFFBasic Operations Video Input Mode Selecting Input ModeRGB Input Mode Press the buttons to select the input modeOther Basic Operations Picture Mode Picture ModeConvenient Functions On-screen information DisplayPress to select a desired picture mode Switching Between Screen SizesNormal mode Wide1 mode Watching Pictures on the Wide ScreenAspect Ratio Screen SizeAdjustment Menu Adjustment MenuAdjusting Pictures Picture Menu Precision Setting for more advanced adjustment Setting Picture Mode Picture ModeStoring the setting of Picture Picture Memory Setting Noise Reduction Noise ReductionCase of Load Case of SavePress To select Position adjustment screenPress Change position values POSITION/SIZE selected from the main menu screenAdjusting Screen Size Size Adjusting Screen Position PositionSetting Range Video, S-video mode Comp.video modePress To adjust Balance Adjusting Audio Audio MenuPress or to select Audio Press or to select BalanceAdjusting Bass Bass Adjusting Treble TrebleAdjusting Volume Balance Balance Setting Loudness LoudnessPress or to select Features Other Adjustments Features MenuPress or to select On Screen Menu Press or to select LanguageFeatures setup screen has the following 5 options AdjustmentOn Screen Menu FunctionVideo Input when the P-TE1000E is installed Function Setting the Input TerminalsVideo Format MaskBNC Input Video Input when the P-TE1010E is installedBNC-Input selection screen DVI Input SUB InputRGB-PC Decoder SUB Input selection screenDPMSfor other than RGB1 Other SettingsAudio Input Black WhiteMinimizing phosphor burn-in Screen Orbiter For RGB Screen Orbiter setting screenSetting Exhibition Mode Exhibition Mode Specifying RGB Input Signal Code Setting For RGB2, RGB3Displaying white over entire screen White Screen Displaying System Status InformationFactory Default selected in the main menu screen Press or to select Factory DefaultPress or to select the Yes Displays the message of having completed the initializationOptions Connecting the signal input cable InstallationDVI-D Factory SettingsModel SpecificationSpecification Problem Action Cleaning and MaintenanceHandy Tips