WATCHING TV
5Switching Audio Mode
This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.
5Sleep Timer
The sleep timer can be set to automatically turn off the unit after an incremental period of time.
TV
While receiving an MTS broadcast, press [AUDIO 
] repeatedly to cycle through the available audio channel.
| MAIN |
| SAP |
| |
| MONO |
MAIN | : Outputs |
SAP | : Outputs second audio program |
MONO | : Outputs |
•The information display will automatically disappear in a few seconds.
DTV
1Press [AUDIO 
] to display the currently selected language and the number of available languages.
A Day of Memories | |||
|
|
| KABC |
| 75 | ENGLISH 1/2 | |
1Press [SLEEP 
] to set the sleep timer.
SLEEP OFF
• Sleep timer display appears on the TV screen.
2Press [SLEEP 
] repeatedly to change the amount of time until shut off.
SLEEP 120MIN.
•You can set your unit to turn off after a set period of time (from 30 to 120 minutes).
•Each press of [SLEEP 
] will increase the time by 30 minutes.
•After set up, the sleep timer display can be called up for checking by pressing [SLEEP 
].
2Press [AUDIO 
] repeatedly to cycle through the available audio languages.
•Available languages differ depending on the broadcast. “OTHER” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.
•The information display will automatically disappear in a few seconds.
To Cancel the Sleep Timer
Press [SLEEP 
] repeatedly until “SLEEP OFF“ is displayed on the TV screen.
Note:
•The sleep timer setting display will automatically disappear in a few seconds.
•When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.
Note:
• Pressing [AUDIO 
] does not control external audio devices.
14
EN