Emerson SLC195EM8 2 owner manual 5PC Settings, CLOCK, Phase, Auto Adjustment

OPTIONAL SETTING

5PC Settings

This function lets you adjust the PC screen position, clock and phase during PC input.

1Press [SETUP] to display the main menu.

2Use [Cursor K / L] to select “PC SETTING”, then press [ENTER].

e.g.) PC mode

	- TV SETUP	-
or	PICTURE
	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	BACK LIGHT	[BRIGHT]
	COLOR TEMP.	[NORMAL]
	PC SETTING

CLOCK, PHASE

Use [Cursor K/L] to select an item,

then use [Cursor s/B] to adjust the “CLOCK” setting to stabilize the PC screen and the “Phase” setting to improve the clarity of the PC screen.

	Cursor s	Cursor B
CLOCK	to decrease setting value	to increase setting value
PHASE
4 Press [SETUP] to exit.

3Adjust the setting.

AUTO ADJUSTMENT

Use [Cursor K/L] to select “AUTO ADJUSTMENT”, then press [ENTER].

	- PC SETTING -
or	AUTO ADJUSTMENT
	HORIZONTAL POSITION	[	15]
	VERTICAL POSITION	[ -15]
	CLOCK	[	-5]
	PHASE	[	0]

•The Horizontal/Vertical position, clock and phase of the PC screen are automatically adjusted in a few seconds.

HORIZONTAL POSITION, VERTICAL POSITION Use [Cursor K/L] to select an item,

then use [Cursor s/B] to adjust the PC screen position.

	Cursor s	Cursor B
HORIZONTAL	to move PC screen left	to move PC screen right
POSITION
VERTICAL	to move PC screen down	to move PC screen up
POSITION

Note:

•Adjust the “PHASE” setting after the “CLOCK” setting has been properly adjusted.

•You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually.

26

EN