Emerson SLC195EM8 2 owner manual Maintenance, With an AM radio

Page 28

TROUBLESHOOTING

Symptom

Remedy

The entered channel number

• Many digital channels have alternate channel numbers. The unit changes the

changes automatically

numbers automatically to the ones signifying the broadcasting stations. These are

 

the numbers used for analog broadcasts.

Remote control does not work

• Check the antenna or cable connection to the main unit.

 

• Check the batteries of the remote control.

 

• Check if there is an obstacle between the infrared sensor window and the remote

 

control.

 

• Test the signal output. If OK, then possible infrared sensor trouble.

 

(Refer to “IR Signal Check” on page 28.)

 

• Aim the remote control directly at the infrared sensor window on the front of the unit.

 

• Reduce the distance to the unit.

 

Re-insert the batteries with their polarities (+/– signs) as indicated.

 

• When there is an infrared-equipped device such as PC near this unit, it may

 

interrupt the remote control signal of this unit.

 

Move the infrared-equipped device away from this unit, change the angle of the

 

infrared sensor or turn off the infrared communication function.

 

Problems with Closed Caption Feature

 

 

Misspelled captions are

• Closed captioning production companies may broadcast programs without

displayed.

correcting the misspelling in a live broadcast.

Captions are not entirely

• Captions that are delayed a few seconds behind the actual dialogue are common

displayed, or captions are

for live broadcasts. Most captioning production companies can display a dialogue

delayed behind the dialogue.

to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective

 

editing is used to insure that the captions remain up-to-date with the current TV

 

screen dialogue.

Captions are displayed as a

• Interference from buildings or weather conditions may cause captioning to be

white box.

incomplete.

No caption is displayed in the

• Broadcasting station may shorten the program to insert advertisement. The closed

closed caption-supported

caption decoder cannot read the information of the shortened program.

program.

 

No caption is displayed

• The videotape may be illegally copied, or the caption signal might not have been

when playing the videotape

read during copying.

containing captions.

 

Black box is displayed in the

• The text mode is selected for caption. Select “CAPTION1”, “CAPTION2” or “OFF”.

TV screen.

 

Note:

The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner's manual for more details on correct operations.

5Maintenance

Cabinet Cleaning

IR Signal Check

Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the power cord.

Servicing

Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Turn off the unit, unplug the power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center.

If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal.

• With an AM radio:

Tune the AM radio station to a non-broadcasting frequency. Point the remote control towards it, push any button and listen. If the sound from the radio flutters, it is receiving the remote control’s infrared signal.

• With a digital camera

(including built-in cell phone cameras):

Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working.

28

EN

Image 28
Contents To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect Antenna SLC195EM8Precautions IntroductionLocation and Handling RADIO-TV InterferenceTo Avoid the Hazards of Electrical Shock and Fire 5Supplied Accessories 5Symbols Used in this Manual5Attaching the Stand 5Trademark InformationFeatures Contents5Buttons on the Remote Control 5Installing the Batteries5Control Panel 5Rear PanelPreparation 5Basic ConnectionAntenna Connection Connection to Cable Box or Satellite BoxComponent Video Connection 5External Device ConnectionVideo Connection PC Connection 5Initial Setup Initial Setting5Main Menu 5Language Selection 5Auto Channel ScanEnglish Español Français Analog Mode Watching TV5Channel Selection VIDEO25Switching Audio Mode 5Sleep TimerMain SAP5Screen Information OFFBroadcasting Information Program Guide5TV Screen Display Mode Sidebar WideFullmovie Wide Fullexpand Side CUTFor PC input signal Optional Setting 5Channel Add/Delete5Picture Adjustment 5Closed CaptionBrightness Contrast Tint Sharpness5DTV Closed Caption OFF5DTVCC Style 5Color Temperature 5Back Light SettingBright Normal Warm Dark Cool Chip TV RatingMpaa Rating To Set the Sub RatingsChange Password Enter password again in Confirm Password spaceCLOCK, Phase 5PC SettingsAuto Adjustment Troubleshooting 5Troubleshooting GuideWith an AM radio MaintenanceWith a digital camera Including built-in cell phone cameras Information Limited Warranty SLC195EM8 Precauciones IntroducciónNúmero de serie Nota para el instalador del sistema Catv 5Conectar el Soporte 5Accesorios Suministrados5Base Inclinable Características Contenido5Botnes en el Mando a Distancia 5Instalación de las PilasMute Sleep5Panel de Control 5Panel TraseroPreparación 5Conexión BásicaConexión de Antena Conexión a Caja de Cable o Caja de SatéliteConexión de Vídeo en Componentes 5Conexión de Dispositivo ExternoConexión de S-video Conexion de PC Conexión de VídeoMonitor Ajuste Inicial 5Configuración Inicial5Menú Principal 5Selección de Idioma LUZ DE FondoTENPE. DE Color Reglage DU PC5Selección de Canal Utilizando los botones numéricosAcerca de la emisión de televisión digital ¿Qué es el canal menor?Para Cancelar el Temporizador de Apagado Para VER LA Televisión5Para Cambiar el Modo de Audio 5Temporizador de Apagado5Información de Pantalla Información DE EmisiónOFF Información de Emisión5Modo de Visualización de Pantalla del Televisor SidebarTotalcine Ancha Totalamplía Cortes LateralsPara señal de entrada PC Tipo de pantalla ResoluciónAjuste Opcional Presione Setup para salir5Agregar/Borrar Canales 5Subtítulos 5Ajuste de ImagenModo de Subtítulos 5Subtítulos en DTV Pueden utilizarse abreviaciones, símbolos y otras5Estilo Dtvcc Tamaño TituloBorde Caracter Color ADELANTE, Color FondoPresione Setup para salir 5Ajuste de Luz de Fondo5Temperatura de Color Puede ajustar el modo de brillo deseadoCuando no haya configurado su contraseña, introduzca Luego presione EnterPara Ajustar las Subcategorías Ej. TV-PGCambiar Contraseña Vuelva a introducir la contraseña en el espacioReglage DU FLOU, Mise EN Phase 5Ajustes de PCEj. modo PC Haga el ajusteSolución DE Problemas 5Guía de Solución de ProblemasMantenimiento InfrarrojosCon una radio AM Con una cámara digitalInformación Garantía Limitada