
Maintenance and Troubleshooting
Table 5-1. Troubleshooting Chart (continued)
Symptom | Possible Cause(s) | Solution |
TEMP and LAMP LEDs are both | • The lamp cover is open. | • Close the lamp cover. |
flashing red. | • Fans are not working | • Please contact your |
| properly. | Vidikron dealer for |
|
| assistance. |
|
|
|
LAMP LED lights solid red. | • The lamp has failed or | • Replace the lamp with a |
| exceeded its usage life. | new one. |
|
|
|
TEMP LED lights solid red. | • Vision 50 internal | • Power off the Vision 50 and |
| temperature is too high. | allow it to cool down. |
|
| Ensure that the intake and |
|
| exhaust vents are not |
|
| blocked. Turn the projector |
|
| back on. If the problem |
|
| persists, please contact |
|
| your Vidikron dealer for |
|
| assistance. |
Vidikron Vision 50 Series Owner’s Operating Manual | 65 |