TANDBERG |
|
Telepresence T3 | Ceiling lights |
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
Unpack the box marked ‘Main Lighting T3’. The box contains the Telepresence T3 Ceiling lighting modules.
The rear ceiling lighting consists of seven 640 mm spot light armatures mechanically fastened together and parallel wired together. Recommended positioning for the rear ceiling lighting are rear edge 5 cm / 2” from the inner rear wall and 228 cm / 7’ 5 3⁄4” from the floor. )
The front ceiling lighting consists of four 450 mm spot light armatures plus three fluorescent light armatures mechanically fastened together and parallel wired together. Recommended positioning for the front ceiling lights is rear edge 200 cm / 6’ 6 7⁄10” from inner rear wall and bottom edge 228 cm / 7’ 5 3⁄4” from the floor).
Ceiling attachment by means of hang wires provided with lighting. Anchor method in ceiling will depend on ceiling structure and composition. You may want to consult an architect or building engineer to define the suitable mounting method.
The lights are to be connected to a switch as described in the document TANDBERG Telepresence
Power supply requirements can be found in the document TANDBERG Telepresence
228 cm 7’ 5 3⁄4”
PAGE 4/58