| TANDBERG |
| Ceiling light | |
Telepresence T3 |
| |||
Light mounting details | ||||
|
|
|
|
|
|
|
|
|
|
Remove screw, plastic retainer and alloy protective guard for wiring access.
Remove screw, plastic retainer and alloy protective guard for wiring access.
Remove the five wire factory installed lead from the fluorescent light armature. (This is only used with dimming) Use a 20cm piece of the three wire lead to couple the adjacent spot/fluorescentlights together. There should be many extra meters of the three wire leads from the spotlights after they are clipped to the correct length.
Blue=N | The four spotlights and the three fluorescent lights are |
Green=GND | physically fastened together with two M4x40 screws |
Brown=L | and knurled plastic nuts. |
Use the chrome plates to cap off the ends of the far right and far left spotlight boxes in the two rows of lights.
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
PAGE 7/58