TANDBERG |
|
Telepresence T3 | Mounting the TCU |
Tip! Put on the rubber legs on the units before they are mounted. Otherwise you will not be able to fasten the screws completely!
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
11.Unscrew the screws holding the brackets (marked in orange in picture be- low) in the left column.
12.Find the TCU in the box marked ’T3 Telepresence kit w/ TCU & screens’ and fasten the TCU to the left column, using the bracket and the same screws as were just loosened. (The TCU is marked in green in the picture below). Con- nect the cables to the TCU.
PAGE 54/58