TANDBERG 150MXP manual Adjusting the Call Settings

Call Settings

Adjusting the Call Settings

TANDBERGTANDBERG15050 MXP MXP 

USERUSERGUIDEGUIDE

Open the Call Menu using any of these five methods:



1	2 abc	3 def
4 ghi	5 jkl	6 mno
7 pqrs	8 tuv	9wxyz
		a/A
	0

 

 Press the green Call key  Press any digit 0–9 Press the Loudspeaker key  Press the Headphone key  Lift the optional handset.

Use the Cursor keys to navigate to Call Settings

Adjust settings as required.

If a gatekeeper is present, you may place IP-calls using “telephone-style” numbers (an E.164 alias), according to the numbering plan implemented in the gatekeeper. The gatekeeper will then translate the dialled number into an IP-address (see H.323 Settings in the Adminstrator’s Guide for more information about gatekeepers).

Press OK or press the Right Cursor key again to produce the submenu.

The Net alternatives are: H.323 and SIP.



Navigate to this icon and press OK to leave menu putting changes into effect.

Navigate to this icon and press OK to leave menu undoing any changes

–including any new default setting you may have introduced.

If you want to change the Default Call Settings, make the required changes to the Call Settings and navigate to Set as Default. Press OK to save these settings, which now will be the default settings for all future manually dialled calls.

Bandwidth determines the quality of the video picture. The system will, by default, connect using Auto Bandwidth. This means that the system will establish a connection using a proper bandwidth for your call. The typical bandwidth used for IP calls is 384 kbps. When bandwidth is set to Auto, the unit will default to 384kbps.

Table of	Unpacking	&	Operating	Making
				Video
Contents	Installation		Principles
				Calls
D 14067.01
05.2007

Making	Making		Phone Book	Incoming	Calling More	Video Meeting		Contact
Calls Using	Telephone
			Details	Calls	Than One		Features	Information
Phone Book	Calls

13