Operation
The Main Menu is the starting point for accessing all Crystal Series LCD functions.
(The ISF Calibration menu is not accessible until you enter a passcode.)
From the Main Menu, select Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in this example, HDMI 1 is the active source.
Main Menu
Runco
Source
Aspect Ratio
Picture Adjust
Audio
Timer
Setup
ISF Calibration
Source
>HDMI 1 HDMI 2 HDMI 3 HDMI 4 Component 1 Component 2
RGB Video 1 Video 2
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program material being viewed; refer to Table
The
Note | The aspect ratio selection persists until you change it. (It is not |
saved independently for each input.) |
Aspect Ratio
>16:9
4:3 Letterbox VirtualWide
27 |