Operation
4.2
Changing the OSD Language
The PlasmaWall OSD language is initially set to English, but can also display the menus in French (Français), Spanish (Español) or German (Deutsch). To change the OSD language:
1.Press MENU and enter the Service menu passcode.
2.Press MENU again and select Service from the Main Menu.
3.Select Language from the Service Menu.
4.Press 
or 
to highlight the desired language and press ENTER. The change takes effect immediately.
You must enter a passcode to access the Service menu.
Note
4.3
Setting the PC Display Properties
To maximize image quality when using the PlasmaWall with a personal computer, you may need to adjust the display properties of your PC video card. To do this:
1.Choose Settings from the Windows Start menu and click on “Control Panel.”
2.Double click on the Display icon.
3.Click the Settings tab on the display dialog box.
4.Adjust the resolution to 1024x768 pixels.
30 | Runco PlasmaWall Owner’s Operating Manual |