Runco PL-50XA manual Tint

Serial Communications

Table 6-1. Serial Commands (continued)

Command	Parameter	Value	Description
	(min/max)	Stored?
TINT	-100/100	YES	Sets a value for tint
SHARPNESS	-6/6	YES	Sets a value for sharpness
NIGHT	NA	YES	Loads “ISF Night” image preset
DAY	NA	YES	Loads “ISF Day” image preset
CUSTOM1	NA	YES	Loads “Custom 1” image preset
CUSTOM2	NA	YES	Loads “Custom 2” image preset
TRIGGER	1/3	YES	Assigns trigger to currently-selected aspect
			ratio
BKGND	-100/100	YES	Sets the background color for letterbox or
			4:3 aspect ratio (-100 = black; 100 = white)
IHPOS?	NA	NA	Returns input horizontal position value
IHEIGHT?	NA	NA	Returns input height value
OHPOS?	NA	NA	Returns output horizontal position value
OHEIGHT?	NA	NA	Returns output height value
COLOR?	NA	NA	Returns color setting value
ASPECT?	NA	NA	Returns current aspect ratio
INPUT?	NA	NA	Returns active input
OUTRES?	NA	NA	Returns output resolution
SERIALNUM?	NA	NA	Returns product serial number
DATE?	NA	NA	Returns product manufacture date
IVPOS?	NA	NA	Returns input vertical position value
OVERSCAN?	NA	NA	Returns overscan percentage
OVPOS?	NA	NA	Returns output vertical position value
BRIGHTNESS?	NA	NA	Returns brightness setting value
TINT?	NA	NA	Returns tint setting value
PRESET?	NA	NA	Returns currently-selected preset
			(ISF Day, ISF Night, Custom 1 or Custom 2)
POWER?	NA	NA	Returns power status
ASPECTIN?	NA	NA	Returns the input source aspect ratio
SWVER?	NA	NA	Returns software version number
IWIDTH?	NA	NA	Returns input horizontal width value
PHASE?	NA	NA	Returns phase setting value

Runco PlasmaWall Owner’s Operating Manual 49