Runco PL-50XA manual Serial Communications

Serial Communications

Table 6-1. Serial Commands (continued)

Command	Parameter	Value	Description
	(min/max)	Stored?
HD1	NA	YES	Selects the RGB HD 1 input
HD2	NA	YES	Selects the RGB HD 2 input
DVI1	NA	YES	Selects the DVI 1 input
DVI2	NA	YES	Selects the DVI 2 input
HD1PASS	NA	YES	Loops HD1 Input to RGB/HD output
HD2PASS	NA	YES	Loops HD2 Input to RGB/HD output
OUT169	NA	YES	Sets the output screen to 1.78:1 (16:9)
OUT235	NA	YES	Sets the output screen to 2.35:1
ANAMORPHIC	NA	YES	Selects the Anamorphic aspect ratio
STANDARD	NA	YES	Selects the Standard (4:3) aspect ratio
LETTERBOX	NA	YES	Selects the Letterbox aspect ratio
VIRTUALWIDE	NA	YES	Selects the VirtualWide aspect ratio
CINEMA	NA	YES	Selects the Cinema aspect ratio
RGBNN	NA	YES	Outputs color space RGB with negative,
			negative sync
RGBPP	NA	YES	Outputs color space RGB with positive,
			positive sync
RGBS	NA	YES	Outputs color space RGB with embedded
			sync on green
PHASE	0/3	YES	Adjusts phase
IHPOS	-100/100	YES	Sets a value for horizontal input position
IVPOS	-100/100	YES	Sets a value for vertical input position
IWIDTH	-100/100	YES	Sets the value for input width
IHEIGHT	-100/100	YES	Sets the value for input height
OVERSCAN	0/10	YES	Sets the overscan percentage
OHPOS	-100/100	YES	Sets the value for output horizontal position
OVPOS	-100/100	YES	Sets the value for output vertical position
OWIDTH	-100/100	YES	Sets the value for output width
OHEIGHT	-100/100	YES	Sets the value for output height
BRIGHTNESS	-100/100	YES	Sets a value for brightness
CONTRAST	-100/100	YES	Sets a value for contrast
COLOR	-100/100	YES	Sets a value for color

48 Runco PlasmaWall Owner’s Operating Manual