Sanyo DSR-3009P Using two monitors for monitoring, Operating monitor, Canceling monitor 2 display

Page 20

VIEWING CAMERA IMAGES

Using two monitors for monitoring

If you connect a monitor to the MON2 output terminal on the rear panel, you can display the images from each camera as single-screen images or show an automatic switching screen on monitor 2, even while the main monitor is showing a split-screen display. In addition, the camera images can be shown in a single-screen display during playback, and when an alarm occurs, the alarm camera images can be automatically sent to monitor 2. The default setting is automatic switching of a single screen.

Operating monitor 2

Press the MON2 button.

The MON2 indicator flashes.

MON2

Displaying single-screen camera 4 images on monitor 2

Press camera select button 4.

The images from camera 4 appear on monitor 2 in a single-screen display.

Displaying single-screen alarm images on monitor 2

When an alarm is received, the alarm images will be displayed on monitor 2 as single-screen images.

External						Camera
alarm						number


			EA 04
			EN			16-06-02 11:18:13

Note: If alarm images are being displayed on monitor 2, change the “MON.2 DISPLAY” setting in the (ALARM OPERATION SET)

SEQUENCE

Main monitor

menu to “ON”. (See page 66.)

Canceling monitor 2 display

Press the MON2 button once more.

The MON2 indicator switches off.

Monitor 2

Monitor 2

MON2

Changing monitor 2 from single-screen display to automatic switching

Press the SEQUENCE button.

The camera images being displayed on monitor 2 will switch automatically.

To cancel automatic switching, press the SEQUENCE button once more.

Main monitor
SEQUENCE
０１�	０２�	０３�	０４�
０５�	０６�	０７�	０８�
０９�	１０�	１１�	１２�
１３�	１４�	１５�	１６�

Monitor 2

Monitor 2

０１�

０１�

English

19

Image 20

Contents English GB Deutsch DFrançais F Español EAvoiding Electrical Shock and Fire PrecautionLocation Contents Main Features Setting-up environmentAccessories Power cord Fixer power cord tie Ferrite core xHard disk protection Hard disk and cooling fan are consumablesPart Names Front panelPart Names Rear panel Connecting high image quality S-VHS video equipment Connecting to an AmplifierConnections Basic connections DSR-3016P modelWhen using the RS485 RJ-11 connector ConnectionsDigital series connections System control connectionsExternal alarm sensor setup Using as a monitor board during a motion sensor alarmConnecting a remote control circuit Sensor Alarm OUT connectorBUILT-IN Hard Disk Hard diskBasic Normal Enhanced Fine Super Fine BUILT-IN Hard DiskRecording Time Operating display Setting the camera image to single-screen display Pausing imagesViewing Camera Images Viewing a single-screen imagePress camera select button 2 once more Viewing Camera ImagesPress camera select button Viewing multiple-screen images Viewing images as 9-screen or 16-screen displaysViewing images as a 4-screen display Plus screen viewingExample To display images from camera 2 in the plus screen Viewing automatically switching imagesAutomatically switching of the single-screen images Automatically switching of the 4-screen images Automatically switching of the plus screen imageUsing two monitors for monitoring Displaying single-screen alarm images on monitorCanceling monitor 2 display Operating monitorRecording Images Normal Recording Area Normal recordingTimer recording Set the timerTimer recording stops when the set end time is reached Press the Timer buttonRecording Images in the Alarm Recording Area Alarm recordingSet alarm recording Suspicious person detectionSet pre-alarm recording Recording Images in the Alarm Recording AreaPre-alarm recording Normal playback Playing Back Recorded ImagesPlayback operations Fast forward/fast rewind and reverse playback Playing Back Recorded ImagesPlayback in a single screen Frame advance forward/reverse Zooming the image during playbackViewing still images Playing back images as a 4-screen display Playing back multiple-screen displaysPlaying back images as 9-screen or 16-screen displays Alarm search See Searching for Recorded ImagesArchive area Preview displayAlarm search Press an Alarm button during playbackSearching for Recorded Images Turn the shuttle dial clockwiseAlarm thumbnail search Last nine alarm recording images recorded appearAlarm number of the currently-selected alarm image flashes Time/date searchArchive area search Example To search for 8 pm on 26 OctoberMotion Detection Search screen appears Alarm display flashesMotion detection search Cursor moves to Start Preview Cursor moves to ChannelExamples of recording area selection 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Saving Copying Recorded Images Copying images to the hard disk archive areaCopy screen appears Archive Area display flashesCursor moves to Pictures CompactFlash recording area Formatting CompactFlash cardsShuttle dial clockwise Sanyo IMG00001 IMG00002 IMG00003Connecting to a drive Backing up to a DDS DAT drive InstalledRemovedInserting an Scsi card sold separately Model No. Super Store dat 24eListing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart and Menu Operations Menu Flow ChartMenu Flow Chart and Menu Operations Basic menu screen operationsOperations while a sub-menu screen is displayed Entering numbersLANGUAGE/CLOCK SET menu Setting the languageInitial SET Menu Initial SET Menu Clock SET settingsSetting summer time EXT. Clock SET setting Timer settingsOperable functions during the period set By the timer To change camera images into automatic switching screensTo detect an alarm input in a camera image To hide camera images with a gray patternHoliday SET setting Example To set 17 November as a holidayAutomatic camera detection Initial SET sub-menu appears, and the cursor moves toRecording Setting Recording Setting Resetting each recording areaRecording Area SET menu Total Capacity displayArea Full Reset setting Follow the same procedure to make the setting forAlarm Recording Area Recording Conditions SET menuFollow the same procedure to make the setting OFF for Cursor moves to Total NumberCursor moves to Overwrite On flashesRelationship between Recording Area SET Normal REC Mode SET menuNormal REC Mode SET setting Repeat the above procedure to set cameras 5 to 16 to OFF Program REC SET menu1P-1 Select Individual Camera Rate FPSTimer SET menu Timer SET settingTimer reservations spanning more than 24 hours Flashes in the FPS columnOFF flashes in the SET column Cursor moves to MON12Press the EXIT/OSD button OFF setting for Program flashesCursor moves to the first line Alarm REC Mode SET menu Alarm REC Mode SET settingSelects the recording method for alarm images = 30721 Alarms can be Recorded= 20480 Alarms can be Recorded = 30200 Alarms can be RecordedDisplay example Alarm recording settings Alarm images Alarm images are recorded Canceled Alternately Alarm canceledCamera 2 alarm canceled When 2 or more alarms occur Camera 4 alarmPre-alarm recording setting Cursor moves to the 2SEC setting for Duration and flashesCursor moves to Alarm Trigger OFF flashesAlarm trigger setting Display examples Alarm recording trigger settingsUsing the timer function for recording Set the alarm duration for each cameraExternal alarm detection Displayed and SA sensor alarm willSignal loss detection alarm Sensor built into this unit an intruderAlarm display settings Cursor moves to Alarm PriorityCursor moves to MON.2 Display Cursor moves to RetriggerMotion Sensor setting Exit11Press the EXIT/OSD button Setting the alarm durationSetting is then complete Resetting an alarm Alarm will then be canceledAlarm images will appear in a single-screen display SecondsGeneral Setting General Setting Display SET settingTitle setting Display SET menuVideo Loss SET setting Color level settingsBuzzer SET setting Auto will flashOperating privileges and security lock Security Lock SET settingSet User password All operations are locked. When the user Password is entered at the password entryCarried out. When the Administrator password Administrator password is entered, allRS-232C/RS-485 SET setting Security lock settingCanceling the security lock RS-232C SelectionHDD SET setting This completes the setting and the cursor moves to ControlRS-485 Selection Hard disk initializationInserting the recommended LAN card Adding a hard diskNetwork connection Network SET setting Network SET sub-menu appears, and the cursor moves toCursor moves to Network Control Cursor moves to IP AddressComputer operation Password SET settingExample Set AB123456 as the ID1 password Screen Setting Main menuScreen Setting Multi Screen settingRepeat steps 4 and 5 above to set 11 and 16 to Display examples Press the EXIT/OSD buttonSequence setting Normal flashesChanges to 16 and 16 changes to 1S flashes English1S flashes Cursor moves to Sequence SETSequence SET sub-menu appears Individual Interval SET sub-menu appearsSet both Timer a and Timer B Cursor moves to Main Monitor SET00 12 12 00 16 16 00 24 24 00 6 Mask settings15Press the EXIT/OSD button Example of mask display when timer is set Cursor moves to Mask SETPower FAILURE/USED Time Display About the sub-menuSaving Menu Setting Details Save menu settings onto a CompactFlash cardLoad menu settings from CompactFlash card Saving to a CompactFlash cardIf copying the recording area settings Saving Menu Setting DetailsLoading saved menu settings Without PRE Alarm With PRE AlarmInterface Specifications Interface Specifications Command TableSpecifications Dimensions mm