Sanyo DSR-3009P instruction manual Listing Data Press Copy to Abort

Page 41

SAVING (COPYING) RECORDED IMAGES

Reading data from a DDS (DAT) drive into the	Deleting DDS (DAT) drive image data
archive area
archive area

Note: All of the previously recorded images in the archive area are deleted when images are transferred in this way.

1 Press the COPY button during recording or when the digital video recorder is stopped.

The ARCHIVE SET screen appears.

COPY			<ARCHIVE SET>
			BACK UP	->
			RESTORE	->
			ERASE	->
			ERASE	->

1 Press the COPY button during recording or when the digital video recorder is stopped.

The ARCHIVE SET screen appears.

COPY			<ARCHIVE SET>
			BACK UP	->
			RESTORE	->
			ERASE	->
			ERASE	->

2 Use the jog dial to select RESTORE and then turn the shuttle dial clockwise.

The message “LISTING DATA !” appears. When playback is complete, the RESTORE FROM DDS (DAT) screen appears.

01

EN	17-11-02 10:00:00

LISTING DATA !

<PRESS COPY TO ABORT>

3 Use the jog dial to select the data to be read into the archive area, and then turn the shuttle dial clockwise.

Reading of data starts. The RESTORE FROM DDS (DAT) screen appears.

The image data on the DDS (DAT) drive is then saved into the archive area.

When all data has been read into the archive area, “RESTORE FINISHED!” appears.

When you play back the images in the archive area, the image data that has been read can be played back.

	<RESTORE FROM		DDS(DAT)>
NO	DATE	TIME	SIZE
0001 13-12-2001		11:13	3.0GB
0002 15-12-2001		10:15	2.0GB
0003 17-12-2001		10:15	2.0GB

STORED DATA ON HDD WILL BE ERASED !

01

EN	17-11-02 10:00:00

RESTORING FROM DDS(DAT) !

<PRESS COPY TO ABORT>

2 Use the jog dial to select ERASE and then turn the shuttle dial clockwise.

The WARNING screen appears.

<RESTORE>

RESTORE DATA FROM DAT

STORED DATA ON HDD WILL BE ERASED !

CONTINUE ?

NO

CHANGE WITH JOG, SET WITH SHUTTLE

3 Use the jog dial to change “NO” to “YES” , and then turn the shuttle dial clockwise.

“ERASING MEDIUM!” appears, and when erasing of data from the tape has been completed, “ERASING FINISHED!” appears.

01

EN	17-11-02 10:00:00

ERASING MEDIUM !

40

English

Image 41

Contents Deutsch D English GBFrançais F Español EAvoiding Electrical Shock and Fire PrecautionLocation Contents Setting-up environment Main FeaturesPower cord Fixer power cord tie Ferrite core x AccessoriesHard disk protection Hard disk and cooling fan are consumablesFront panel Part NamesPart Names Rear panel Connecting to an Amplifier Connecting high image quality S-VHS video equipmentConnections Basic connections DSR-3016P modelConnections When using the RS485 RJ-11 connectorDigital series connections System control connectionsUsing as a monitor board during a motion sensor alarm External alarm sensor setupConnecting a remote control circuit Sensor Alarm OUT connectorHard disk BUILT-IN Hard DiskBasic Normal Enhanced Fine Super Fine BUILT-IN Hard DiskRecording Time Operating display Pausing images Setting the camera image to single-screen displayViewing Camera Images Viewing a single-screen imagePress camera select button 2 once more Viewing Camera ImagesPress camera select button Viewing images as 9-screen or 16-screen displays Viewing multiple-screen imagesViewing images as a 4-screen display Plus screen viewingExample To display images from camera 2 in the plus screen Viewing automatically switching imagesAutomatically switching of the single-screen images Automatically switching of the plus screen image Automatically switching of the 4-screen imagesDisplaying single-screen alarm images on monitor Using two monitors for monitoringCanceling monitor 2 display Operating monitorNormal recording Recording Images Normal Recording AreaSet the timer Timer recordingTimer recording stops when the set end time is reached Press the Timer buttonAlarm recording Recording Images in the Alarm Recording AreaSet alarm recording Suspicious person detectionSet pre-alarm recording Recording Images in the Alarm Recording AreaPre-alarm recording Normal playback Playing Back Recorded ImagesPlayback operations Fast forward/fast rewind and reverse playback Playing Back Recorded ImagesPlayback in a single screen Frame advance forward/reverse Zooming the image during playbackViewing still images Playing back images as a 4-screen display Playing back multiple-screen displaysPlaying back images as 9-screen or 16-screen displays Searching for Recorded Images Alarm search SeeArchive area Preview displayPress an Alarm button during playback Alarm searchSearching for Recorded Images Turn the shuttle dial clockwiseLast nine alarm recording images recorded appear Alarm thumbnail searchAlarm number of the currently-selected alarm image flashes Time/date searchExample To search for 8 pm on 26 October Archive area searchMotion Detection Search screen appears Alarm display flashesMotion detection search Cursor moves to Start Preview Cursor moves to ChannelExamples of recording area selection 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Copying images to the hard disk archive area Saving Copying Recorded ImagesCopy screen appears Archive Area display flashesCursor moves to Pictures Formatting CompactFlash cards CompactFlash recording areaShuttle dial clockwise Sanyo IMG00001 IMG00002 IMG00003InstalledRemoved Connecting to a drive Backing up to a DDS DAT driveInserting an Scsi card sold separately Model No. Super Store dat 24eListing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart Menu Flow Chart and Menu OperationsBasic menu screen operations Menu Flow Chart and Menu OperationsOperations while a sub-menu screen is displayed Entering numbersLANGUAGE/CLOCK SET menu Setting the languageInitial SET Menu Initial SET Menu Clock SET settingsSetting summer time Timer settings EXT. Clock SET settingTo change camera images into automatic switching screens Operable functions during the period set By the timerTo detect an alarm input in a camera image To hide camera images with a gray patternExample To set 17 November as a holiday Holiday SET settingInitial SET sub-menu appears, and the cursor moves to Automatic camera detectionRecording Setting Resetting each recording area Recording SettingRecording Area SET menu Total Capacity displayFollow the same procedure to make the setting for Area Full Reset settingAlarm Recording Area Recording Conditions SET menuCursor moves to Total Number Follow the same procedure to make the setting OFF forCursor moves to Overwrite On flashesRelationship between Recording Area SET Normal REC Mode SET menuNormal REC Mode SET setting Program REC SET menu Repeat the above procedure to set cameras 5 to 16 to OFF1P-1 Select Individual Camera Rate FPSTimer SET setting Timer SET menuFlashes in the FPS column Timer reservations spanning more than 24 hoursOFF flashes in the SET column Cursor moves to MON12Press the EXIT/OSD button OFF setting for Program flashesCursor moves to the first line Alarm REC Mode SET setting Alarm REC Mode SET menuSelects the recording method for alarm images = 30721 Alarms can be Recorded= 20480 Alarms can be Recorded = 30200 Alarms can be RecordedDisplay example Alarm recording settings Alarm canceled Alarm images Alarm images are recorded Canceled AlternatelyCamera 2 alarm canceled When 2 or more alarms occur Camera 4 alarmCursor moves to the 2SEC setting for Duration and flashes Pre-alarm recording settingCursor moves to Alarm Trigger OFF flashesDisplay examples Alarm recording trigger settings Alarm trigger settingSet the alarm duration for each camera Using the timer function for recordingDisplayed and SA sensor alarm will External alarm detectionSignal loss detection alarm Sensor built into this unit an intruderCursor moves to Alarm Priority Alarm display settingsCursor moves to MON.2 Display Cursor moves to RetriggerExit Motion Sensor setting11Press the EXIT/OSD button Setting the alarm durationSetting is then complete Alarm will then be canceled Resetting an alarmAlarm images will appear in a single-screen display SecondsGeneral Setting Display SET setting General SettingTitle setting Display SET menuColor level settings Video Loss SET settingBuzzer SET setting Auto will flashOperating privileges and security lock Security Lock SET settingSet User password Password is entered at the password entry All operations are locked. When the userCarried out. When the Administrator password Administrator password is entered, allSecurity lock setting RS-232C/RS-485 SET settingCanceling the security lock RS-232C SelectionThis completes the setting and the cursor moves to Control HDD SET settingRS-485 Selection Hard disk initializationInserting the recommended LAN card Adding a hard diskNetwork connection Network SET sub-menu appears, and the cursor moves to Network SET settingCursor moves to Network Control Cursor moves to IP AddressComputer operation Password SET settingExample Set AB123456 as the ID1 password Main menu Screen SettingMulti Screen setting Screen SettingRepeat steps 4 and 5 above to set 11 and 16 to Display examples Press the EXIT/OSD buttonNormal flashes Sequence settingChanges to 16 and 16 changes to 1S flashes EnglishCursor moves to Sequence SET 1S flashesSequence SET sub-menu appears Individual Interval SET sub-menu appearsCursor moves to Main Monitor SET Set both Timer a and Timer B00 12 12 00 16 16 00 24 24 00 6 Mask settings15Press the EXIT/OSD button Cursor moves to Mask SET Example of mask display when timer is setAbout the sub-menu Power FAILURE/USED Time DisplaySave menu settings onto a CompactFlash card Saving Menu Setting DetailsLoad menu settings from CompactFlash card Saving to a CompactFlash cardIf copying the recording area settings Saving Menu Setting DetailsLoading saved menu settings With PRE Alarm Without PRE AlarmInterface Specifications Command Table Interface SpecificationsDimensions mm Specifications