Sanyo DSR-3009P instruction manual Set both Timer a and Timer B, Cursor moves to Main Monitor SET

Page 85

SCREEN SETTING

9 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

Example 3: To set a 5-second interval for the automatic switching of main monitor images and to prevent automatic switching from occurring when it is not required, such as when using the timer function.

 

<MAIN MONITOR SET>

 

 

 

T-1

 

IN

IN

IN

IN

01:ON

02:ON

03:ON

04:ON

05:ON

06:ON

07:ON

08:ON

09:ON

10:ON

11:ON

12:ON

13:ON

14:ON

15:ON

16:ON

1 Set the timer setting for both TIMER A and TIMER B in the TIME PERIOD SET menu. (See page 46.)

Set both TIMER A and TIMER B.

<TIME PERIOD SET>

 

 

TIME PERIOD

T1

T2

T3

T4

TIME PERIOD A

00:00

00:00

00:00

00:00

TIME PERIOD B

00:00

00:00

00:00

00:00

SELECT TIME PERIOD

 

 

 

SEQUENCE

TIME PERIOD

A

 

MASK

TIME PERIOD

A

 

MOTION SENSOR

TIME PERIOD

A

 

2 Use the jog dial to move the cursor to SEQUENCE, and then turn the shuttle dial clockwise.

“1S” flashes.

<SCREEN SET>

 

 

 

 

1.MULTI SCREEN

:

NORMAL

MULTI SCREEN SET

 

->

2.SEQUENCE

:

 

1S

 

SEQUENCE SET

 

 

 

->

3.MASK

:

OFF

MASK SET

 

->

3 Use the jog dial to change the SEQUENCE setting to “INDIV.” , and then turn the shuttle dial clockwise.

The cursor moves to SEQUENCE SET.

4 Turn the shuttle dial clockwise.

The SEQUENCE SET sub-menu appears.

<SEQUENCE SET>

 

MAIN MONITOR

:

1S

MAIN MONITOR SET

 

->

MON.2

:

1S

MON.2 SET

 

->

QUAD

:

1S

INDIVIDUAL INTERVAL

SET

->

5 Turn the jog dial to select MAIN MONITOR, and then turn the shuttle dial clockwise.

“1S” flashes.

6 Use the jog dial to set “5S” , and then turn the shuttle dial clockwise.

The cursor moves to MAIN MONITOR SET.

Display examples:

•1 – 30S: Sets the automatic switching time for the main monitor.

•INDIV. : Select when setting individual switching times for each camera for the main monitor.

7 Turn the shuttle dial clockwise.

The MAIN MONITOR SET sub-menu will be displayed. This sub-menu screen is used to select whether the images from cameras 1 to 16 are displayed or not displayed for the time set by the timer setting (T-1).

8 Turn the shuttle dial clockwise, use the jog dial to select “T-1” , and then turn the shuttle dial clockwise.

The cursor moves to 01.

9 Use the jog dial to move the cursor to CAMERA 1 (01), and then turn the shuttle dial clockwise.

“ON” flashes.

10Use the jog dial to set “OFF” , and then turn the shuttle dial clockwise.

Repeat the above procedure to set cameras 2 (02) through to 8 (08) to “OFF”.

<MAIN MONITOR SET>

 

 

T-1

 

 

IN

IN

IN

IN

01:OFF

02:OFF

03:OFF

04:OFF

05:OFF

06:OFF

07:OFF

08:OFF

09:ON

10:ON

11:ON

12:ON

13:ON

14:ON

15:ON

16:ON

11Use the jog dial to move the cursor to T-1, and then turn the shuttle dial clockwise.

84

English

Page 84 Page 86
Image 85
Page 84 Page 86
Contents Deutsch D English GBFrançais F Español ELocation PrecautionAvoiding Electrical Shock and Fire Contents Setting-up environment Main FeaturesPower cord Fixer power cord tie Ferrite core x AccessoriesHard disk protection Hard disk and cooling fan are consumablesFront panel Part NamesPart Names Rear panel Connecting to an Amplifier Connecting high image quality S-VHS video equipmentConnections Basic connections DSR-3016P modelConnections When using the RS485 RJ-11 connectorDigital series connections System control connectionsUsing as a monitor board during a motion sensor alarm External alarm sensor setupConnecting a remote control circuit Sensor Alarm OUT connectorHard disk BUILT-IN Hard DiskRecording Time BUILT-IN Hard DiskBasic Normal Enhanced Fine Super Fine Operating display Pausing images Setting the camera image to single-screen displayViewing Camera Images Viewing a single-screen imagePress camera select button Viewing Camera ImagesPress camera select button 2 once more Viewing images as 9-screen or 16-screen displays Viewing multiple-screen imagesViewing images as a 4-screen display Plus screen viewingAutomatically switching of the single-screen images Viewing automatically switching imagesExample To display images from camera 2 in the plus screen Automatically switching of the plus screen image Automatically switching of the 4-screen imagesDisplaying single-screen alarm images on monitor Using two monitors for monitoringCanceling monitor 2 display Operating monitorNormal recording Recording Images Normal Recording AreaSet the timer Timer recordingTimer recording stops when the set end time is reached Press the Timer buttonAlarm recording Recording Images in the Alarm Recording AreaSet alarm recording Suspicious person detectionPre-alarm recording Recording Images in the Alarm Recording AreaSet pre-alarm recording Playback operations Playing Back Recorded ImagesNormal playback Playback in a single screen Playing Back Recorded ImagesFast forward/fast rewind and reverse playback Viewing still images Zooming the image during playbackFrame advance forward/reverse Playing back images as 9-screen or 16-screen displays Playing back multiple-screen displaysPlaying back images as a 4-screen display Searching for Recorded Images Alarm search SeeArchive area Preview displayPress an Alarm button during playback Alarm searchSearching for Recorded Images Turn the shuttle dial clockwiseLast nine alarm recording images recorded appear Alarm thumbnail searchAlarm number of the currently-selected alarm image flashes Time/date searchExample To search for 8 pm on 26 October Archive area searchMotion detection search Alarm display flashesMotion Detection Search screen appears Examples of recording area selection Cursor moves to ChannelCursor moves to Start Preview 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Copying images to the hard disk archive area Saving Copying Recorded ImagesCopy screen appears Archive Area display flashesCursor moves to Pictures Formatting CompactFlash cards CompactFlash recording areaShuttle dial clockwise Sanyo IMG00001 IMG00002 IMG00003InstalledRemoved Connecting to a drive Backing up to a DDS DAT driveInserting an Scsi card sold separately Model No. Super Store dat 24eListing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart Menu Flow Chart and Menu OperationsBasic menu screen operations Menu Flow Chart and Menu OperationsOperations while a sub-menu screen is displayed Entering numbersInitial SET Menu Setting the languageLANGUAGE/CLOCK SET menu Setting summer time Clock SET settingsInitial SET Menu Timer settings EXT. Clock SET settingTo change camera images into automatic switching screens Operable functions during the period set By the timerTo detect an alarm input in a camera image To hide camera images with a gray patternExample To set 17 November as a holiday Holiday SET settingInitial SET sub-menu appears, and the cursor moves to Automatic camera detectionRecording Setting Resetting each recording area Recording SettingRecording Area SET menu Total Capacity displayFollow the same procedure to make the setting for Area Full Reset settingAlarm Recording Area Recording Conditions SET menuCursor moves to Total Number Follow the same procedure to make the setting OFF forCursor moves to Overwrite On flashesNormal REC Mode SET setting Normal REC Mode SET menuRelationship between Recording Area SET Program REC SET menu Repeat the above procedure to set cameras 5 to 16 to OFF1P-1 Select Individual Camera Rate FPSTimer SET setting Timer SET menuFlashes in the FPS column Timer reservations spanning more than 24 hoursOFF flashes in the SET column Cursor moves to MONCursor moves to the first line OFF setting for Program flashes12Press the EXIT/OSD button Alarm REC Mode SET setting Alarm REC Mode SET menuSelects the recording method for alarm images = 30721 Alarms can be RecordedDisplay example Alarm recording settings = 30200 Alarms can be Recorded= 20480 Alarms can be Recorded Alarm canceled Alarm images Alarm images are recorded Canceled AlternatelyCamera 2 alarm canceled When 2 or more alarms occur Camera 4 alarmCursor moves to the 2SEC setting for Duration and flashes Pre-alarm recording settingCursor moves to Alarm Trigger OFF flashesDisplay examples Alarm recording trigger settings Alarm trigger settingSet the alarm duration for each camera Using the timer function for recordingDisplayed and SA sensor alarm will External alarm detectionSignal loss detection alarm Sensor built into this unit an intruderCursor moves to Alarm Priority Alarm display settingsCursor moves to MON.2 Display Cursor moves to RetriggerExit Motion Sensor settingSetting is then complete Setting the alarm duration11Press the EXIT/OSD button Alarm will then be canceled Resetting an alarmAlarm images will appear in a single-screen display SecondsGeneral Setting Display SET setting General SettingTitle setting Display SET menuColor level settings Video Loss SET settingBuzzer SET setting Auto will flashSet User password Security Lock SET settingOperating privileges and security lock Password is entered at the password entry All operations are locked. When the userCarried out. When the Administrator password Administrator password is entered, allSecurity lock setting RS-232C/RS-485 SET settingCanceling the security lock RS-232C SelectionThis completes the setting and the cursor moves to Control HDD SET settingRS-485 Selection Hard disk initializationNetwork connection Adding a hard diskInserting the recommended LAN card Network SET sub-menu appears, and the cursor moves to Network SET settingCursor moves to Network Control Cursor moves to IP AddressExample Set AB123456 as the ID1 password Password SET settingComputer operation Main menu Screen SettingMulti Screen setting Screen SettingRepeat steps 4 and 5 above to set 11 and 16 to Display examples Press the EXIT/OSD buttonNormal flashes Sequence settingChanges to 16 and 16 changes to 1S flashes EnglishCursor moves to Sequence SET 1S flashesSequence SET sub-menu appears Individual Interval SET sub-menu appearsCursor moves to Main Monitor SET Set both Timer a and Timer B15Press the EXIT/OSD button Mask settings00 12 12 00 16 16 00 24 24 00 6 Cursor moves to Mask SET Example of mask display when timer is setAbout the sub-menu Power FAILURE/USED Time DisplaySave menu settings onto a CompactFlash card Saving Menu Setting DetailsLoad menu settings from CompactFlash card Saving to a CompactFlash cardLoading saved menu settings Saving Menu Setting DetailsIf copying the recording area settings With PRE Alarm Without PRE AlarmInterface Specifications Command Table Interface SpecificationsDimensions mm Specifications
Top Page Image Contents