Sanyo DSR-3009P Alarm display settings, Cursor moves to Alarm Priority, Cursor moves to Retrigger

Page 67

RECORDING SETTING

Alarm display settings

MENU

<ALARM OPERATION SET>

FULL

 

MAIN MON. DISPLAY

:

 

ALARM PRIORITY

:

LAST

 

MON.2 DISPLAY

:

OFF

 

RETRIGGER

:

OFF

 

MOTION SENSOR

 

->

 

ALARM DURATION SET

 

->

1 Press the MENU button to select RECORD SET, and then turn the shuttle dial clockwise.

The RECORD SET sub-menu appears, and the cursor is positioned at RECORDING AREA SET.

2 Use the jog dial to move the cursor to ALARM OPERATION SET, and then turn the shuttle dial clockwise.

The ALARM OPERATION SET sub-menu appears, and the cursor is positioned at MAIN MON. DISPLAY.

<ALARM OPERATION SET>

 

MAIN MON. DISPLAY

:

FULL

ALARM PRIORITY

:

LAST

MON.2 DISPLAY

:

OFF

RETRIGGER

:

OFF

MOTION SENSOR

 

->

3 Turn the shuttle dial clockwise. “FULL” flashes.

Display examples:

•FULL: When an alarm is detected, images from the channel that received the alarm are displayed on the main monitor as a single screen.

•16: When an alarm is detected, images are displayed in a 16-screen display.

•9: When an alarm is detected, images are displayed on the main monitor in a 9-screen display.

•NC: The main monitor display does not change when an alarm is detected.

4 Use the jog dial to select the display mode (example: 9), and then turn the shuttle dial clockwise.

The cursor moves to ALARM PRIORITY.

5 Turn the shuttle dial clockwise, use the jog dial to select the ALARM PRIORITY setting (example: FIRST), and then turn the shuttle dial clockwise.

The cursor moves to MON.2 DISPLAY.

<ALARM OPERATION SET>

 

 

MAIN MON. DISPLAY

:

9

 

ALARM PRIORITY

:

FIRST

MON.2 DISPLAY

:

OFF

 

RETRIGGER

:

OFF

MOTION SENSOR

 

->

 

Display examples:

•LAST: When more than one alarm is detected at the same time, the alarms are given priority starting from the last alarm received.

•FIRST: When more than one alarm is detected at the same time, only the first alarm received is displayed, and images for subsequent alarms are not displayed.

•SWITCH: When more than one alarm is detected at the same time, the alarm images for each alarm are displayed alternately at 1-second intervals.

6 Use the jog dial to select the MON.2 DISPLAY setting (example: OFF), and then turn the shuttle dial clockwise.

The cursor moves to RETRIGGER.

Display examples:

•ON: When an alarm is detected, the alarm images are displayed on monitor 2.

•OFF: Alarm images are not displayed on monitor 2.

7 Turn the shuttle dial clockwise, use the jog dial to change the RETRIGGER setting (example: ON), and then turn the shuttle dial clockwise.

The cursor moves to MOTION SENSOR.

<ALARM OPERATION SET>

 

 

MAIN MON. DISPLAY

:

9

 

ALARM PRIORITY

:

FIRST

MON.2 DISPLAY

:

OFF

RETRIGGER

:

OFF

MOTION SENSOR

 

->

 

ALARM DURATION SET

 

->

Display examples:

•ON: The duration of alarm recording is extended if an alarm is received from the same channel for which alarm recording is currently in operation.

•OFF: The alarm duration is not extended even if another alarm is received from the same channel.

8 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

66

English

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Español E English GBDeutsch D Français FLocation PrecautionAvoiding Electrical Shock and Fire Contents Setting-up environment Main FeaturesHard disk and cooling fan are consumables AccessoriesPower cord Fixer power cord tie Ferrite core x Hard disk protectionFront panel Part NamesPart Names Rear panel Basic connections DSR-3016P model Connecting high image quality S-VHS video equipmentConnecting to an Amplifier ConnectionsSystem control connections When using the RS485 RJ-11 connectorConnections Digital series connectionsSensor Alarm OUT connector External alarm sensor setupUsing as a monitor board during a motion sensor alarm Connecting a remote control circuitHard disk BUILT-IN Hard DiskRecording Time BUILT-IN Hard DiskBasic Normal Enhanced Fine Super Fine Operating display Viewing a single-screen image Setting the camera image to single-screen displayPausing images Viewing Camera ImagesPress camera select button Viewing Camera ImagesPress camera select button 2 once more Plus screen viewing Viewing multiple-screen imagesViewing images as 9-screen or 16-screen displays Viewing images as a 4-screen displayAutomatically switching of the single-screen images Viewing automatically switching imagesExample To display images from camera 2 in the plus screen Automatically switching of the plus screen image Automatically switching of the 4-screen imagesOperating monitor Using two monitors for monitoringDisplaying single-screen alarm images on monitor Canceling monitor 2 displayNormal recording Recording Images Normal Recording AreaPress the Timer button Timer recordingSet the timer Timer recording stops when the set end time is reachedSuspicious person detection Recording Images in the Alarm Recording AreaAlarm recording Set alarm recordingPre-alarm recording Recording Images in the Alarm Recording AreaSet pre-alarm recording Playback operations Playing Back Recorded ImagesNormal playback Playback in a single screen Playing Back Recorded ImagesFast forward/fast rewind and reverse playback Viewing still images Zooming the image during playbackFrame advance forward/reverse Playing back images as 9-screen or 16-screen displays Playing back multiple-screen displaysPlaying back images as a 4-screen display Preview display Alarm search SeeSearching for Recorded Images Archive areaTurn the shuttle dial clockwise Alarm searchPress an Alarm button during playback Searching for Recorded ImagesTime/date search Alarm thumbnail searchLast nine alarm recording images recorded appear Alarm number of the currently-selected alarm image flashesExample To search for 8 pm on 26 October Archive area searchMotion detection search Alarm display flashesMotion Detection Search screen appears Examples of recording area selection Cursor moves to ChannelCursor moves to Start Preview 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Archive Area display flashes Saving Copying Recorded ImagesCopying images to the hard disk archive area Copy screen appearsCursor moves to Pictures Sanyo IMG00001 IMG00002 IMG00003 CompactFlash recording areaFormatting CompactFlash cards Shuttle dial clockwiseModel No. Super Store dat 24e Connecting to a drive Backing up to a DDS DAT driveInstalledRemoved Inserting an Scsi card sold separatelyListing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart Menu Flow Chart and Menu OperationsEntering numbers Menu Flow Chart and Menu OperationsBasic menu screen operations Operations while a sub-menu screen is displayedInitial SET Menu Setting the languageLANGUAGE/CLOCK SET menu Setting summer time Clock SET settingsInitial SET Menu Timer settings EXT. Clock SET settingTo hide camera images with a gray pattern Operable functions during the period set By the timerTo change camera images into automatic switching screens To detect an alarm input in a camera imageExample To set 17 November as a holiday Holiday SET settingInitial SET sub-menu appears, and the cursor moves to Automatic camera detectionRecording Setting Total Capacity display Recording SettingResetting each recording area Recording Area SET menuRecording Conditions SET menu Area Full Reset settingFollow the same procedure to make the setting for Alarm Recording AreaOn flashes Follow the same procedure to make the setting OFF forCursor moves to Total Number Cursor moves to OverwriteNormal REC Mode SET setting Normal REC Mode SET menuRelationship between Recording Area SET Select Individual Camera Rate FPS Repeat the above procedure to set cameras 5 to 16 to OFFProgram REC SET menu 1P-1Timer SET setting Timer SET menuCursor moves to MON Timer reservations spanning more than 24 hoursFlashes in the FPS column OFF flashes in the SET columnCursor moves to the first line OFF setting for Program flashes12Press the EXIT/OSD button = 30721 Alarms can be Recorded Alarm REC Mode SET menuAlarm REC Mode SET setting Selects the recording method for alarm imagesDisplay example Alarm recording settings = 30200 Alarms can be Recorded= 20480 Alarms can be Recorded When 2 or more alarms occur Camera 4 alarm Alarm images Alarm images are recorded Canceled AlternatelyAlarm canceled Camera 2 alarm canceledOFF flashes Pre-alarm recording settingCursor moves to the 2SEC setting for Duration and flashes Cursor moves to Alarm TriggerDisplay examples Alarm recording trigger settings Alarm trigger settingSet the alarm duration for each camera Using the timer function for recordingSensor built into this unit an intruder External alarm detectionDisplayed and SA sensor alarm will Signal loss detection alarmCursor moves to Retrigger Alarm display settingsCursor moves to Alarm Priority Cursor moves to MON.2 DisplayExit Motion Sensor settingSetting is then complete Setting the alarm duration11Press the EXIT/OSD button Seconds Resetting an alarmAlarm will then be canceled Alarm images will appear in a single-screen displayGeneral Setting Display SET menu General SettingDisplay SET setting Title settingAuto will flash Video Loss SET settingColor level settings Buzzer SET settingSet User password Security Lock SET settingOperating privileges and security lock Administrator password is entered, all All operations are locked. When the userPassword is entered at the password entry Carried out. When the Administrator passwordRS-232C Selection RS-232C/RS-485 SET settingSecurity lock setting Canceling the security lockHard disk initialization HDD SET settingThis completes the setting and the cursor moves to Control RS-485 SelectionNetwork connection Adding a hard diskInserting the recommended LAN card Cursor moves to IP Address Network SET settingNetwork SET sub-menu appears, and the cursor moves to Cursor moves to Network ControlExample Set AB123456 as the ID1 password Password SET settingComputer operation Main menu Screen SettingDisplay examples Press the EXIT/OSD button Screen SettingMulti Screen setting Repeat steps 4 and 5 above to set 11 and 16 to1S flashes English Sequence settingNormal flashes Changes to 16 and 16 changes toIndividual Interval SET sub-menu appears 1S flashesCursor moves to Sequence SET Sequence SET sub-menu appearsCursor moves to Main Monitor SET Set both Timer a and Timer B15Press the EXIT/OSD button Mask settings00 12 12 00 16 16 00 24 24 00 6 Cursor moves to Mask SET Example of mask display when timer is setAbout the sub-menu Power FAILURE/USED Time DisplaySaving to a CompactFlash card Saving Menu Setting DetailsSave menu settings onto a CompactFlash card Load menu settings from CompactFlash cardLoading saved menu settings Saving Menu Setting DetailsIf copying the recording area settings With PRE Alarm Without PRE AlarmInterface Specifications Command Table Interface SpecificationsDimensions mm Specifications
Top Page Image Contents