Sanyo DSR-3009P Playing back multiple-screen displays, Playing back images as a 4-screen display

Page 28

PLAYING BACK RECORDED IMAGES

Playing back multiple-screen displays

Recorded images can be playback in several split-screen formats. Furthermore, the images from each camera can be displayed in any position within the split-screen. (See page 81.)

1 Press the PLAY/STOP button.

PLAY/STOP

Playing back images as 9-screen or 16-screen displays

1 Press the MULTI button.

The display switches between 9-screen and 16-screen each time the MULTI button is pressed.

To return to a single-screen display, press a camera select button. For the DSR-3009P model, only the 9-screen display is available with no switching.

MULT

Playing back images as a 4-screen display

1 Press the QUAD button.

Images appear as a 4-screen display.

QUAD

2 Press the QUAD button once more.

Camera images are switched in 4-screen display units (1 – 4, 5 – 8, 9 – 12, 13 – 16) each time the button is pressed.

To return to a single-screen display, press a camera select button. For the DSR-3009P model, a 4-screen display of images from cameras 1 – 4, 5 – 8, or 9 – 3 will appear each time the button is pressed.

QUAD

Playing back images as 13-screen or 6-screen displays (plus screen)

1 Press the PLUS button.

The display changes to show a 13-screen or 6-screen display with a plus screen as a quarter-screen picture in the lower-right corner.

PLUS

Plus screen

2 Press the MULTI button.

The display switches between 13-screen and 6-screen each time the MULTI button is pressed.

For the DSR-3009P model, only the 6-screen display is available with no switching.

MULT

3 Press a camera select button (example: 12).

The playing back images from the selected camera will be displayed in the plus screen.

To cancel the plus screen, press the PLUS button once more. For the DSR-3009P model, press camera select button 9.

12

English

27

Image 28

Contents English GB Deutsch DFrançais F Español ELocation PrecautionAvoiding Electrical Shock and Fire Contents Main Features Setting-up environmentAccessories Power cord Fixer power cord tie Ferrite core xHard disk protection Hard disk and cooling fan are consumablesPart Names Front panelPart Names Rear panel Connecting high image quality S-VHS video equipment Connecting to an AmplifierConnections Basic connections DSR-3016P modelWhen using the RS485 RJ-11 connector ConnectionsDigital series connections System control connectionsExternal alarm sensor setup Using as a monitor board during a motion sensor alarmConnecting a remote control circuit Sensor Alarm OUT connectorBUILT-IN Hard Disk Hard diskRecording Time BUILT-IN Hard DiskBasic Normal Enhanced Fine Super Fine Operating display Setting the camera image to single-screen display Pausing imagesViewing Camera Images Viewing a single-screen imagePress camera select button Viewing Camera ImagesPress camera select button 2 once more Viewing multiple-screen images Viewing images as 9-screen or 16-screen displaysViewing images as a 4-screen display Plus screen viewingAutomatically switching of the single-screen images Viewing automatically switching imagesExample To display images from camera 2 in the plus screen Automatically switching of the 4-screen images Automatically switching of the plus screen imageUsing two monitors for monitoring Displaying single-screen alarm images on monitorCanceling monitor 2 display Operating monitorRecording Images Normal Recording Area Normal recordingTimer recording Set the timerTimer recording stops when the set end time is reached Press the Timer buttonRecording Images in the Alarm Recording Area Alarm recordingSet alarm recording Suspicious person detectionPre-alarm recording Recording Images in the Alarm Recording AreaSet pre-alarm recording Playback operations Playing Back Recorded ImagesNormal playback Playback in a single screen Playing Back Recorded ImagesFast forward/fast rewind and reverse playback Viewing still images Zooming the image during playbackFrame advance forward/reverse Playing back images as 9-screen or 16-screen displays Playing back multiple-screen displaysPlaying back images as a 4-screen display Alarm search See Searching for Recorded ImagesArchive area Preview displayAlarm search Press an Alarm button during playbackSearching for Recorded Images Turn the shuttle dial clockwiseAlarm thumbnail search Last nine alarm recording images recorded appearAlarm number of the currently-selected alarm image flashes Time/date searchArchive area search Example To search for 8 pm on 26 OctoberMotion detection search Alarm display flashesMotion Detection Search screen appears Examples of recording area selection Cursor moves to ChannelCursor moves to Start Preview 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Saving Copying Recorded Images Copying images to the hard disk archive areaCopy screen appears Archive Area display flashesCursor moves to Pictures CompactFlash recording area Formatting CompactFlash cardsShuttle dial clockwise Sanyo IMG00001 IMG00002 IMG00003Connecting to a drive Backing up to a DDS DAT drive InstalledRemovedInserting an Scsi card sold separately Model No. Super Store dat 24eListing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart and Menu Operations Menu Flow ChartMenu Flow Chart and Menu Operations Basic menu screen operationsOperations while a sub-menu screen is displayed Entering numbersInitial SET Menu Setting the languageLANGUAGE/CLOCK SET menu Setting summer time Clock SET settingsInitial SET Menu EXT. Clock SET setting Timer settingsOperable functions during the period set By the timer To change camera images into automatic switching screensTo detect an alarm input in a camera image To hide camera images with a gray patternHoliday SET setting Example To set 17 November as a holidayAutomatic camera detection Initial SET sub-menu appears, and the cursor moves toRecording Setting Recording Setting Resetting each recording areaRecording Area SET menu Total Capacity displayArea Full Reset setting Follow the same procedure to make the setting forAlarm Recording Area Recording Conditions SET menuFollow the same procedure to make the setting OFF for Cursor moves to Total NumberCursor moves to Overwrite On flashesNormal REC Mode SET setting Normal REC Mode SET menuRelationship between Recording Area SET Repeat the above procedure to set cameras 5 to 16 to OFF Program REC SET menu1P-1 Select Individual Camera Rate FPSTimer SET menu Timer SET settingTimer reservations spanning more than 24 hours Flashes in the FPS columnOFF flashes in the SET column Cursor moves to MONCursor moves to the first line OFF setting for Program flashes12Press the EXIT/OSD button Alarm REC Mode SET menu Alarm REC Mode SET settingSelects the recording method for alarm images = 30721 Alarms can be RecordedDisplay example Alarm recording settings = 30200 Alarms can be Recorded= 20480 Alarms can be Recorded Alarm images Alarm images are recorded Canceled Alternately Alarm canceledCamera 2 alarm canceled When 2 or more alarms occur Camera 4 alarmPre-alarm recording setting Cursor moves to the 2SEC setting for Duration and flashesCursor moves to Alarm Trigger OFF flashesAlarm trigger setting Display examples Alarm recording trigger settingsUsing the timer function for recording Set the alarm duration for each cameraExternal alarm detection Displayed and SA sensor alarm willSignal loss detection alarm Sensor built into this unit an intruderAlarm display settings Cursor moves to Alarm PriorityCursor moves to MON.2 Display Cursor moves to RetriggerMotion Sensor setting ExitSetting is then complete Setting the alarm duration11Press the EXIT/OSD button Resetting an alarm Alarm will then be canceledAlarm images will appear in a single-screen display SecondsGeneral Setting General Setting Display SET settingTitle setting Display SET menuVideo Loss SET setting Color level settingsBuzzer SET setting Auto will flashSet User password Security Lock SET settingOperating privileges and security lock All operations are locked. When the user Password is entered at the password entryCarried out. When the Administrator password Administrator password is entered, allRS-232C/RS-485 SET setting Security lock settingCanceling the security lock RS-232C SelectionHDD SET setting This completes the setting and the cursor moves to ControlRS-485 Selection Hard disk initializationNetwork connection Adding a hard diskInserting the recommended LAN card Network SET setting Network SET sub-menu appears, and the cursor moves toCursor moves to Network Control Cursor moves to IP AddressExample Set AB123456 as the ID1 password Password SET settingComputer operation Screen Setting Main menuScreen Setting Multi Screen settingRepeat steps 4 and 5 above to set 11 and 16 to Display examples Press the EXIT/OSD buttonSequence setting Normal flashesChanges to 16 and 16 changes to 1S flashes English1S flashes Cursor moves to Sequence SETSequence SET sub-menu appears Individual Interval SET sub-menu appearsSet both Timer a and Timer B Cursor moves to Main Monitor SET15Press the EXIT/OSD button Mask settings00 12 12 00 16 16 00 24 24 00 6 Example of mask display when timer is set Cursor moves to Mask SETPower FAILURE/USED Time Display About the sub-menuSaving Menu Setting Details Save menu settings onto a CompactFlash cardLoad menu settings from CompactFlash card Saving to a CompactFlash cardLoading saved menu settings Saving Menu Setting DetailsIf copying the recording area settings Without PRE Alarm With PRE AlarmInterface Specifications Interface Specifications Command TableSpecifications Dimensions mm