Sanyo DSR-3009P Adding a hard disk, Network connection, Inserting the recommended LAN card

Page 78

GENERAL SETTING

3 Turn the shuttle dial clockwise.

A WARNING screen appears and then “NO” flashes.

<WARNING>

THIS CHANGE WILL INITIALIZE THE DISK.

ALL RECORDING WILL BE ERASED.

ARE YOU SURE ?

NO

CHANGE LINES WITH JOG. SELECT WITH SHUTTLE

4 Use the jog dial to select YES, and then turn the shuttle dial.

The “HDD INITIALIZING!” screen appear and the hard disk is initialized. Then the display is returned to the HDD SET screen.

HDD INITIALIZING !

5 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

Adding a hard disk

Consult the place of purchase if you would like to add a hard disk. If adding a hard disk, use an additional hard disk unit (sold separately).

FNETWORK SET SETTING

Network connection

Insert a recommended commercially-available LAN card or PC card (Ethernet card) into the PC card slot at the rear of the digital video recorder. This will enable you to view images on this unit and make menu settings through the network (LAN) from a personal computer.

• When connecting directly to the computer (without using an

Ethernet hub)

1 – 16

Main monitor

1 2 3 4

5 6 7 8

9 10 11 12

13 14 15 16

TV monitor

(sold separately)

1

Computer

 

Always use a

 

cross-type

2 3

Ethernet cable.

•When connecting via an intranet (using an Ethernet hub)

1 – 16

Main monitor

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

 

 

 

 

TV monitor

(sold separately)

2

Ethernet switching hub

Computer

2 3

Always use a straight- type Ethernet cable.

Note: If adding another hard disk, be sure to initialize the hard disks. When this is done, both hard disks will be initialized, so that any existing data on the original hard disk will be cleared.

Reference: HDD SET screen

Computer

Intranet

•MIRRORING: When a hard disk is added, or if a 160 GB hard disk is installed, it is possible to record the same images on two hard disks. This means that even if an image write error occurs you will be able to read from an area where there is no write error.

•PLAYBACK DRIVE: After MIRRORING has been set, you will be able to specify which of the two hard disks is to be used for reading the recorded image.

With mirroring setting, if an error has occurred in the playback image, switch from the hard disk in current use (DISK1) to (DISK2).

Ethernet switching hub

Inserting the recommended LAN card

(Installed)(Removed)

1

3

2

3

12

Locking can be carried out easily by sliding the knob.

Return the knob after unlocking.

Note: The PC card slot is for 16-bit 5 V cards only.

Do not use 32-bit card bus types of card, as they may damage the PC card slot of the digital video recorder.

English

77

Page 77 Page 79
Image 78
Page 77 Page 79
Contents Français F English GBDeutsch D Español EPrecaution LocationAvoiding Electrical Shock and Fire Contents Main Features Setting-up environmentHard disk protection AccessoriesPower cord Fixer power cord tie Ferrite core x Hard disk and cooling fan are consumablesPart Names Front panelPart Names Rear panel Connections Connecting high image quality S-VHS video equipmentConnecting to an Amplifier Basic connections DSR-3016P modelDigital series connections When using the RS485 RJ-11 connectorConnections System control connectionsConnecting a remote control circuit External alarm sensor setupUsing as a monitor board during a motion sensor alarm Sensor Alarm OUT connectorBUILT-IN Hard Disk Hard diskBUILT-IN Hard Disk Recording TimeBasic Normal Enhanced Fine Super Fine Operating display Viewing Camera Images Setting the camera image to single-screen displayPausing images Viewing a single-screen imageViewing Camera Images Press camera select buttonPress camera select button 2 once more Viewing images as a 4-screen display Viewing multiple-screen imagesViewing images as 9-screen or 16-screen displays Plus screen viewingViewing automatically switching images Automatically switching of the single-screen imagesExample To display images from camera 2 in the plus screen Automatically switching of the 4-screen images Automatically switching of the plus screen imageCanceling monitor 2 display Using two monitors for monitoringDisplaying single-screen alarm images on monitor Operating monitorRecording Images Normal Recording Area Normal recordingTimer recording stops when the set end time is reached Timer recordingSet the timer Press the Timer buttonSet alarm recording Recording Images in the Alarm Recording AreaAlarm recording Suspicious person detectionRecording Images in the Alarm Recording Area Pre-alarm recordingSet pre-alarm recording Playing Back Recorded Images Playback operationsNormal playback Playing Back Recorded Images Playback in a single screenFast forward/fast rewind and reverse playback Zooming the image during playback Viewing still imagesFrame advance forward/reverse Playing back multiple-screen displays Playing back images as 9-screen or 16-screen displaysPlaying back images as a 4-screen display Archive area Alarm search SeeSearching for Recorded Images Preview displaySearching for Recorded Images Alarm searchPress an Alarm button during playback Turn the shuttle dial clockwiseAlarm number of the currently-selected alarm image flashes Alarm thumbnail searchLast nine alarm recording images recorded appear Time/date searchArchive area search Example To search for 8 pm on 26 OctoberAlarm display flashes Motion detection searchMotion Detection Search screen appears Cursor moves to Channel Examples of recording area selectionCursor moves to Start Preview 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Copy screen appears Saving Copying Recorded ImagesCopying images to the hard disk archive area Archive Area display flashesCursor moves to Pictures Shuttle dial clockwise CompactFlash recording areaFormatting CompactFlash cards Sanyo IMG00001 IMG00002 IMG00003Inserting an Scsi card sold separately Connecting to a drive Backing up to a DDS DAT driveInstalledRemoved Model No. Super Store dat 24eListing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart and Menu Operations Menu Flow ChartOperations while a sub-menu screen is displayed Menu Flow Chart and Menu OperationsBasic menu screen operations Entering numbersSetting the language Initial SET MenuLANGUAGE/CLOCK SET menu Clock SET settings Setting summer timeInitial SET Menu EXT. Clock SET setting Timer settingsTo detect an alarm input in a camera image Operable functions during the period set By the timerTo change camera images into automatic switching screens To hide camera images with a gray patternHoliday SET setting Example To set 17 November as a holidayAutomatic camera detection Initial SET sub-menu appears, and the cursor moves toRecording Setting Recording Area SET menu Recording SettingResetting each recording area Total Capacity displayAlarm Recording Area Area Full Reset settingFollow the same procedure to make the setting for Recording Conditions SET menuCursor moves to Overwrite Follow the same procedure to make the setting OFF forCursor moves to Total Number On flashesNormal REC Mode SET menu Normal REC Mode SET settingRelationship between Recording Area SET 1P-1 Repeat the above procedure to set cameras 5 to 16 to OFFProgram REC SET menu Select Individual Camera Rate FPSTimer SET menu Timer SET settingOFF flashes in the SET column Timer reservations spanning more than 24 hoursFlashes in the FPS column Cursor moves to MONOFF setting for Program flashes Cursor moves to the first line12Press the EXIT/OSD button Selects the recording method for alarm images Alarm REC Mode SET menuAlarm REC Mode SET setting = 30721 Alarms can be Recorded= 30200 Alarms can be Recorded Display example Alarm recording settings= 20480 Alarms can be Recorded Camera 2 alarm canceled Alarm images Alarm images are recorded Canceled AlternatelyAlarm canceled When 2 or more alarms occur Camera 4 alarmCursor moves to Alarm Trigger Pre-alarm recording settingCursor moves to the 2SEC setting for Duration and flashes OFF flashesAlarm trigger setting Display examples Alarm recording trigger settingsUsing the timer function for recording Set the alarm duration for each cameraSignal loss detection alarm External alarm detectionDisplayed and SA sensor alarm will Sensor built into this unit an intruderCursor moves to MON.2 Display Alarm display settingsCursor moves to Alarm Priority Cursor moves to RetriggerMotion Sensor setting ExitSetting the alarm duration Setting is then complete11Press the EXIT/OSD button Alarm images will appear in a single-screen display Resetting an alarmAlarm will then be canceled SecondsGeneral Setting Title setting General SettingDisplay SET setting Display SET menuBuzzer SET setting Video Loss SET settingColor level settings Auto will flashSecurity Lock SET setting Set User passwordOperating privileges and security lock Carried out. When the Administrator password All operations are locked. When the userPassword is entered at the password entry Administrator password is entered, allCanceling the security lock RS-232C/RS-485 SET settingSecurity lock setting RS-232C SelectionRS-485 Selection HDD SET settingThis completes the setting and the cursor moves to Control Hard disk initializationAdding a hard disk Network connectionInserting the recommended LAN card Cursor moves to Network Control Network SET settingNetwork SET sub-menu appears, and the cursor moves to Cursor moves to IP AddressPassword SET setting Example Set AB123456 as the ID1 passwordComputer operation Screen Setting Main menuRepeat steps 4 and 5 above to set 11 and 16 to Screen SettingMulti Screen setting Display examples Press the EXIT/OSD buttonChanges to 16 and 16 changes to Sequence settingNormal flashes 1S flashes EnglishSequence SET sub-menu appears 1S flashesCursor moves to Sequence SET Individual Interval SET sub-menu appearsSet both Timer a and Timer B Cursor moves to Main Monitor SETMask settings 15Press the EXIT/OSD button00 12 12 00 16 16 00 24 24 00 6 Example of mask display when timer is set Cursor moves to Mask SETPower FAILURE/USED Time Display About the sub-menuLoad menu settings from CompactFlash card Saving Menu Setting DetailsSave menu settings onto a CompactFlash card Saving to a CompactFlash cardSaving Menu Setting Details Loading saved menu settingsIf copying the recording area settings Without PRE Alarm With PRE AlarmInterface Specifications Interface Specifications Command TableSpecifications Dimensions mm
Top Page Image Contents