AUTOREPEAT RECORDING
Autorepeat Recording
The same tape can be recorded over many times.
œFollow the Before starting steps, under “NORMAL RECORDING”.
1Press the MENU button to display the (MAIN MENU 1) menu.
2Press the SHIFT ] button to select the “6. RECORD SET” line, then press the MENU button.
øThe (RECORD SET) menu appears.
@@@@@<RECORD@SET>
*ALARM@RECORD@MODE@@Y1
@@SPEED@@@@@@@@@@@@@N12
@@DURATION@@@@@@@@@@20S
*PRE@ALARM@RECORD@@@OFF
*POST@ALARM@RECORD@@OFF
@@DURATION@@@@@@@@@@20S
*TRIGGER@SHOT@REC@@@1
*TAPE@END@MODE@@@@@@REW
3Press the SHIFT ] (or \) button, until the “TAPE END MODE” (or “REPEAT RECORD”) setting is flashing.
4Press the DATA l (or j) button to set to “R 1” or “R 2”. (Please refer to page 24, “Setting the Mode at the End of the Tape”.)
5Press the MENU EXIT button to save the setting.
øThe REPEAT indicator will light.
6Press the REC/PLAY SPEED l (or j) button to set the recording speed mode.
7Press the REC button.
øRecording will start. When the tape end is reached, the VCR will rewind it to the beginning, and recording will resume.
øWhen the end of the tape is reached, a buzzer will be heard (if in the (BUZZER SET) menu, TAPE END is set to “Y”) and “OFF” will be displayed until the rewinding operation starts.
NOTES:
œIf during autorepeat recording there is an alarm trigger, “A” is displayed on the digital display and alarm recording will take place. (Please refer to page 27, “ALARM RECORDING”.)
œIf the “REPEAT RECORD” setting is R 1, the REPEAT indicator will go off if there is an alarm trigger. After alarm recording, the recording will continue to the end of the tape then it will be rewound to the beginning and stop. “OFF” will be displayed on the digital display. To turn off the buzzer (if in the (BUZZER SET) menu, TAPE END is set to “Y”) and the “OFF” display, press the STOP, EJECT, FF, REW or PLAY button.
œIf “A” is displayed on the digital display and the “REPEAT RECORD” setting is R1, autorepeat recording is not possible.
26 | English |