Installation Instructions
Add these two mounting tabs (from the panel hardware bag)
Add this mounting flange (from the panel hardware bag)
Remove this side 
mounting flange (keep the left or right flange and mounting hardware for the bottom flange)
Add this mounting flange | Remove this side |
(using one of the removed | mounting flange |
side mounting flanges and |
|
the associated hardware) |
|
Figure 11 Mounting Flanges for Installation
4.Take one of the side mounting flanges that you removed in step 2 above, and screw it to the bottom of the XADC.
The mounting flange screw holes will align with the two pilot holes in the XADC.
5.Take the two small mounting tabs (with pilot pin attached) from the mounting hardware bag in the panel shipping box and screw them to the top of the XADC, behind the AC and DC wiring compartment holes, see Figure 11.
Connecting the XADC and Panel Together
To connect the XADC and panel together:
1.Slide the XADC under the panel until the pilot pins on the mounting tabs on the top of the XADC slide in to the corresponding holes on the mounting clips on the bottom of the panel, see Figure 12.
2.Using the hardware provided in the panel hardware bag, screw the panel to the XADC using the holes on the panel that have lined up with the holes on the top of the XADC mounting flange.
XADC mounting tabs with pilot pins and panel mounting clips
Figure 12 Connecting the XADC and Panel
17 |