Xantrex Technology XADC installation instructions DC PCB Removal

Page 19

Installation Instructions

3.Connect the incoming negative (-) black cable from each of the loads to the negative DC bus.

4.Connect the incoming positive (+) red cable from each of the loads to the positive DC bus.

5.Install fuses for the DC loads and the DC battery. The bottom four DC fuses are for the battery. Fuses for DC loads should be Littelfuse Type 257 or equivalent and the maximum allowed fuse for the DC loads is 20 A.

Important: You may remove the PCB with the positive DC bus and fuse holders (by removing the three screws) for ease of connection. Keep the screws for reconnecting the PCB. See Figure 13.

Remove these three screws

Figure 13 DC PCB Removal

6.Connect the incoming negative (-) black cable from the battery to the negative DC battery lug.

7.Connect the incoming positive (+) red cable from the battery to the positive DC battery lug.

8.Tighten the clamp screws on the strain relief to secure the DC wires.

DC Knockouts

DC fuses

Negative DC bus

Positive DC bus

Negative DC

battery lug

Positive DC battery lug

Figure 14 Connecting DC to the Panel

975-0301-01-01

19

Image 19

Contents Xantrex AC to DC Converter Installation Instructions Audience PurposeConventions Used Important Safety Instructions Precautions When Working With Batteries Explosive Gas PrecautionsFCC Information to the User Main Components InstallationXadc Internal Components AC/DC Distribution PanelAC/DC Distribution Panel Components AC/DC Distribution Panel and Xadc Internal Components Installation Tools and Materials Installation CodesChoosing a Location Installation ConfigurationsPreparing to Install Installing the Xadc stand-alone unitTo prepare the Xadc for installation To connect the DC Connecting the DC BatteryPreparing the Mounting Location for the Xadc To prepare the Xadc mounting locationTo connect the AC input Connecting the AC InputTo prepare the panel for installation Installing Xadc with the AC/DC Distribution PanelConfigurations To mount the Xadc using the mounting platesTo prepare the Xadc for connected installation To prepare the Xadc for remote installationTo connect the Xadc and panel together Connecting the Xadc and Panel TogetherPreparing the Mounting Location for the Xadc and Panel Connecting the DC to the PanelConnection Types for AC and DC DC PCB Removal To connect the panel to the Xadc DC side Connecting the Panel to the Xadc DC SideTo connect the panel to the Xadc AC side Connecting the Panel to the Xadc AC SideConnecting the AC to the Panel To install the AC loads Mounting the Xadc and Panel when ConnectedTo mount the Xadc and panel when connected Mounting the Xadc and Panel Remotely DC Wire Size and Torque ValuesTo mount the Xadc and panel remotely Electrical Performance Mechanical SpecificationsDate and Revision