Xantrex Technology RC7 owner manual Set Clock RC/GS Only, Select Genset RC/GS Only

RC-GS_manual.book Page 17 Friday, May 20, 2005 4:57 PM

Configuring the RC/GS and RC7

LCD	Contrast:	LCD	Contrast:	LCD	Contrast:	LCD	Contrast:
Max	Contrast	87%		62%		Min	Contrast

Figure 3-9LCD Contrast menu items

Set Clock (RC/GS Only)

Some RC/GS automatic generator start functions are based on the time of day. The clock must be properly set to ensure the programmed function will perform at the correct time.

The clock uses 24-hour time and ranges from 00:00 to 23:59.

To access the Set Clk menu, scroll down past the generator menus by pressing the down arrow. A flashing cursor appears below (and behind) the hour (H) or minute (M) characters in the screen. Every eight seconds the cursor alternates positions. When the cursor is under the hour digit, press the Settings button to set the hours to the current hour (00 to 23). When the cursor is under the minutes digit, press the Settings button to set the minutes to the current minute (0 to 59). Press and hold the Settings button to quickly increase the selected value, or press and release to increase the value by one unit at a time.

Hour selected

Set Clk: 0-23:59

HH:MM

Increase value (Settings button)

Figure 3-10Set Clock display

Select Genset (RC/GS Only)

After setting the clock, press the up arrow once to access the Select Genset menu. Select the type and model of the generator by pressing the Settings button until the generator’s name and model is displayed. The default is Onan QuietDiesel.

975-0210-01-01 17