Xantrex Technology RC/GS, RC7 owner manual High Battery Voltage, Low Battery Voltage

Page 51

RC-GS_manual.book Page 39 Friday, May 20, 2005 4:57 PM

System Status Displays

High Battery Voltage

The “Hibat/Stop Chrg” System Status message appears when the battery voltage rises above 15.7 V. This condition usually occurs only when a charging source other than the RV Series Inverter/Charger is used to charge the battery bank. Switch off any charging sources other than the RV Series Inverter/ Charger to allow the voltage level to drop. The inverter automatically resets and resumes operation when the battery voltage falls below 15.4 V.

Inverter

Charge

System Status:

;

Batt. Full

Hibat/Stop Chrg

 

Error

Error Condition Remedy

Buzzer sounds

 

 

822-4A-001

(press arrow

 

Error LED ON

button to cancel)

Figure 4-15High Battery Voltage Error Message

Low Battery Voltage

The “Lobat/Start Chrg” System Status message appears when the battery voltage drops below 10.5 volts. The red Error LED illuminates and the buzzer sounds. The inverter shuts off to prevent damage to the batteries. Provide an AC supply (such as shore power or a generator) to the inverter/charger to automatically start charging the batteries.

Inverter

Charge

System Status:

;

Batt. Full

Lobat/Start Chrg

 

Error

Error Condition Remedy

Buzzer sounds

 

822-4A-001

(press arrow

Error LED ON

button to cancel)

Figure 4-16

Low Battery Voltage Error Message

975-0210-01-01

 

39

Image 51
Contents RV Series Remote Control RC-GSmanual.book Page ii Friday, May 20, 2005 457 PM RV Series Remote Controls Date and Revision Purpose Scope AudienceOrganization Related Information Conventions UsedGeneral Precautions Important Safety InstructionsExplosive gas precautions Contents Operation Warranty and Return Information RC-GSmanual.book Page x Friday, May 20, 2005 457 PM Introduction 1RC/GS Front Panel Features2Remote Control Cable Types Indicators and Controls Installation Materials and tools required Installing the RC/GS and RC7Choosing a location Mounting and Connecting2RV Series Inverter/Charger Front Panel System Status AC Available RC-GSmanual.book Page 10 Friday, May 20, 2005 457 PM Configuration Changing Settings Viewing the Setup MenuConfiguring the RC/GS and RC7 Battery CapacitySet Idle Battery Capacity Settings Battery TypeMax Charge Rate Set Shore PowerLCD Contrast Remote SetupSelect Genset RC/GS Only Set Clock RC/GS Only11Select Genset menu items Generator Start RC/GS Only13Generator Start/Stop Generator Stop RC/GS Only15Generator Start/Stop on Generator Start menu Thermostat Start Enable and Disable RC/GS Only17Begin Generator Quiet Time display Begin Gen Quiet and End Gen Quiet RC/GS Only19Setup/Menu Item Buttons Saving Setup ChoicesRV Series Inverter/Charger and RC/GS and RC7 Setup RC/GS and RC7 Setup Menu SummaryAuto Gen Start Setup RC/GS Only Operation Status LEDs Status LEDsCharge LED Inverter LEDError LED LCD ScreenBatt. Full LED Meter Mode ButtonsOn/Off Genset Status Pending, Cranking and Restart RC/GS Only System Status DisplaysAC Source Messages Waiting for ACGenset Status Starter Cooldown Starter Cooldown and Gen Start RC/GS OnlyGenset Error Messages RC/GS Only Gen Quiet FaultGen Won’t Start 5Gen Quiet Fault Error Message System Status Inverting Inverter Mode MessagesCharger Mode Messages Bulk ChargingAbsorption Charging Equalizing Charging Float Charging12Equalizing Mode Inverter/Charger Error MessagesOverload Over TemperatureLow Battery Voltage High Battery VoltageCharger Fault Charger FaultBattery Voltage Meters DisplayAverage Shunt Amps Inverter/Charger Current AC Output VoltageAC Input Amps System Status Messages Battery State of ChargeGenerator Start/Stop RC/GS Only Set Shore PowerPreparation for Storage Storage ChecklistGenerator Status Messages RC/GS Only RC/GS and RC7 User’s Menu SummaryVAC System Status DisplayRC-GSmanual.book Page 48 Friday, May 20, 2005 457 PM Warranty Warranty and Return InformationWarranty and Return Disclaimer ProductExclusions Return Procedure Return Material Authorization PolicyOut of Warranty Service Serial Number Purchased From Purchase Date Information About Your SystemRC-GSmanual.book Page 55 Friday, May 20, 2005 457 PM Xantrex Technology Inc

RC7, RC/GS specifications

Xantrex Technology is renowned for its high-quality power management solutions, and the Xantrex RC/GS and RC7 are no exception. These advanced devices are designed to provide users with reliable and efficient battery monitoring and management capabilities, making them ideal for applications in marine, RV, and off-grid solar systems.

One of the standout features of the Xantrex RC/GS and RC7 is their comprehensive display. The user-friendly interface includes an easy-to-read LCD screen that presents critical information at a glance. Users can monitor essential data such as battery voltage, current, state of charge, and system status, allowing for efficient management of power resources. The clear graphical representation of battery status is particularly beneficial for quick assessments, ensuring users can make informed decisions about energy usage.

The RC/GS and RC7 models leverage advanced communication technologies, including RS-485 and CAN bus options, facilitating integration with a range of other devices within a power management system. This capacity enables seamless communication with Xantrex inverters, chargers, and other compatible products, creating a cohesive energy management environment. Furthermore, the devices support multiple languages, making them accessible to a global audience.

Another notable characteristic of the Xantrex RC/GS and RC7 is their versatility. They are compatible with various battery chemistries, including lead-acid and lithium-ion batteries, making them suitable for different applications. The device's intelligent battery management algorithms optimize charging cycles, extending the life of the batteries while enhancing overall system performance.

The robust construction of the Xantrex RC/GS and RC7 ensures they can withstand the rigors of outdoor use. With features like water resistance and temperature tolerance, these models are designed to perform reliably even in challenging environments.

In addition to monitoring battery performance, the RC/GS and RC7 offer customizable alarm settings that notify users of critical conditions, such as low voltage or overcharging. This proactive approach to battery management helps prevent damage and ensures the longevity of energy storage systems.

In summary, the Xantrex Technology RC/GS and RC7 are sophisticated battery monitoring solutions that combine cutting-edge technology with user-friendly features. With comprehensive monitoring capabilities, advanced communication options, and robust construction, these devices are an excellent choice for anyone seeking reliable power management in various applications.