Installer Menu
Use the Installer Menu to set up or change operational settings.
See detailed descriptions of the Installer Menu items on the following pages
Installer menu items can be accessed by using the optional installer’s remote control. Just press and hold MENU (about 8 seconds) until the menu disap- pears, then press 9, 8, 7, 6, then OK (Enter). To remove the Installer’s Menu, press OK repeatedly. Any changes you make will be stored in non- volatile memory.
The Installer menu opens with the main menu. Use MENU and Up or Down ADJ to sequence through the installer menus and submenus. Use Up or Down ADJ to scroll up/down within the
menus and submenus. To change a setting, use the Left or Right ADJ keys. Press OK to return to the main menu.
Using the Installer Menu
Items
The Factory Menu that is intended for qualified service technicians only, is not shown.
service type adjustments and only
qualified technicians having specialized test equipment should access them.
INSTALLERS
INSTALLER1
INSTALLER2
INSTALLER3
INSTALLER4
INSTALLER5
INSTALLER6
INSTALLER7
INSTALLER8
TV MICRO V3.00
D2A CARD V3.03
D2A CARD | - MICRO COMM | ||
STATUS |
| OK |
|
Menu | Function | Value | Default | Brief Description of Function and Comments |
Item |
| Range | Value |
|
INSTALLER SEQ | 0 - 3 | 0 | Leave default set at 0. | |
POWER MANAGE | 0 - 7 | 0 | Sets number of hours of no activity before auto shutoff. | |
AC ON | 0 / 1 | 0 | Set to 1 to enable auto turn on at power up. | |
0 - 7 | 1 | Sets Tuning band for Analog channels. | ||
STRT CHANNEL | 0 - 255 | 255 | Channel at | |
|
|
|
| channels, use with item |
CHAN LOCK | 0 / 1 | 0 | When set to 1, cannot tune from current channel. | |
GHOST CH | 0 / 1 | 0 | Set to 1 to enable Ghost Channel display. | |
START VOLUME | 255 | Volume level at TV | ||
MIN VOLUME | 0 - 63 | 0 | Minimum volume setting. | |
MAX VOLUME | 0 - 63 | 63 | Maximum volume setting. | |
MUTE DISABLE | 0 / 1 | 0 | Set to 1 to disable mute function. | |
NOT USED |
|
|
| |
IR BANKS EN | 0 / 1 | 0 | Set to 1: enables TV to respond to IR codes to | |
|
|
|
| change Channel Bank directly. |
SCAN MODE | 0 / 1 | 1 | Puts TV | |
STRT CH IN SM | 0 / 1 | 0 | Set to 1 to put TV on/off below start channel number. | |
SLEEP TIMER | 0 / 1 | 1 | Set to 1 to enable Sleep Timer. | |
EN TIMER | 0 / 1 | 1 | Set to 1 to enable Timer. | |
ALARM | 0 / 1 | 1 | Set to 1 to enable Alarm. | |
NOT USED |
|
|
| |
NOT USED |
|
|
| |
FEATURE LEVEL | 0 / 1 | 1 | Zen 1 Leave default set 1 (1 Zen1). | |
0 / 1 | 1 | Set to 1 to enable | ||
MAX BLK HRS | 0 - 99 | 12 | Sets number of Parental Control blocking hours. | |
CAPTION LOCK | 0 / 1 | 0 | Set to 1 to retain caption setting at turn off. |
Page 42 |