Installer Menu
Detailed Descriptions for Installer Menu Items 60-I through 76-I
60-I. EN VIDEO COL (Enable Video Menu Color)
Set to 1 to enable custom color settings for the Video menu. Set to 0 to disable custom color set- tings for the Video menu.
Color)
0 | = Black | 3 = Yellow | 6 = Cyan | |
1 | = Red | 4 | = Blue | 7 = White |
2 | = Green | 5 | = Violet |
|
Color)
0 | = Black | 3 = Yellow | 6 = Cyan | |
1 | = Red | 4 | = Blue | 7 = White |
2 | = Green | 5 | = Violet |
|
63-I. EN PTL COL (Enable V-Chip Menu)
Set to 1 to enable custom color settings for the V- Chip menu. Set to 0 to disable custom color set- tings for the
64-I. FOR PTL M (V-Chip Menu Foreground
Color) Set according to Color Chart.
0 | = Black | 3 = Yellow | 6 = Cyan | |
1 | = Red | 4 | = Blue | 7 = White |
2 | = Green | 5 | = Violet |
|
65-I. BCK PTL M (V-Chip Menu Background
Color) Set according to Color Chart.
0 | = Black | 3 = Yellow | 6 = Cyan | |
1 | = Red | 4 | = Blue | 7 = White |
2 | = Green | 5 | = Violet |
|
66-I. NOT USED
67-I. NOT USED
68-I. NOT USED
69-I. EN CH-T COL (Enable CH-Time OSD Color)
Set to 1 to enable custom color for the Channel- Time display. Set to 0 to disable custom color for the
Foreground Color)
0 | = Black | 3 = Yellow | 6 = Cyan |
1 | = Red | 4 = Blue | 7 = White |
2 | = Green | 5 = Violet |
|
Note: If foreground and background color are the same, menu background is transparent.
Background Color)
0 | = Black | 3 = Yellow | 6 = Cyan |
1 | = Red | 4 = Blue | 7 = White |
2 | = Green | 5 = Violet |
|
Note: If foreground and background color are the same, menu background is transparent.
72-I. NOT USED
73-I. CH NOT AVBLE (Channel Not Available)
When set to 1 and channel override is set to 0, “NOT AVAILABLE” message is displayed when directly accessing a channel not in the favorite channel list. (Applies to NTSC Channels Only.)
74-I. CH-TIME SIZE
If set to 1 and transparent background is selected for
75-I. REVERT CH (Revert Channel)
If set to 1 and loss of M.P.I. communication occurs, TV automatically tunes to the specified Start Channel.
76-I. DEFEAT XDS
Set to 1 to disable XDS display. Set to 0 to enable XDS display. XDS data (provided at the discretion of the broadcaster), is available only on analog channels. After a channel change, wait 5 seconds then press ENTER to see XDS data, if available.
Page 49 |