Installer Menu
Detailed Descriptions for Installer Menu Items 28-I through 56-I
28-I. CH. OVER RIDE (Channel Override)
If set to 1, the user can select channels with either Channel Up/Down or by direct keypad entry. If set to 0, only those channels that are entered for scanning may be selected by direct keypad entry. Note: If set to 0, Auto Program is locked out; (as shown on Setup menu) channel search is not available.
Set to 1 for operation with systems from On Command Corporation.
30-I. ACK MASK
M.P.I. Communication Parameter. Leave at default setting unless changed by
31-I. POLL RATE
M.P.I. Communication Parameter. Leave at default setting unless changed by
32-I. TIMING PULSE
M.P.I. Communication Parameter. Leave at default setting unless changed by
Set to 1 to enable rear AUX (Video) input.
Set to 0 to disable rear AUX input.
Set to 1 for M.P.I. AUX source to be reported as a channel number instead of channel 0. Set to 0 to disable AUX identification change.
48-I. DIS SETUP M (Disable Setup Menu)
Set to 1 to disable the Setup menu. Setup menu
will not appear. Set to 0 to enable the Setup
menu.
49-I. NOT USED
50-I. DIS VIDEO M (Disable Video Menu)
Set to 1 to disable the Video menu. Video menu
will not appear. Set to 0 to enable the Video
menu.
51-I. DIS VCHIP M (Disable V-Chip Menu)
Set to 1 to disable
not appear. Set to 0 to enable the
52-I. NOT USED
53-I. DIS CH-TIME (Disable Channel-Time OSD)
Set to 1 to disable the
Set to 0 to enable the
54-I. EN SET COL (Enable Setup Menu Color)
Set to 1 to enable custom color settings for the Setup menu. Set to 0 to disable custom color set- tings for the Setup menu.
55-I. FOR SETUP M (Setup Menu Foreground
Color) Set according to Color Chart.
0 | = Black | 3 = Yellow | 6 = Cyan | |
1 | = Red | 4 | = Blue | 7 = White |
2 | = Green | 5 | = Violet |
|
56-I. BCK SETUP M (Setup Menu Background
Color) Set according to Color Chart.
0 | = Black | 3 = Yellow | 6 = Cyan | |
1 | = Red | 4 | = Blue | 7 = White |
2 | = Green | 5 | = Violet |
|
Page 48 |