Radio Shack Kameleon 4-in-One Clearing ALL Custom Programming, Setting the Sleep Timer

RS 4in1 Kam User Manual.fm Page 13 Friday, March 4, 2005 9:09 AM

OWNER’S MANUAL

CLEARING A MACRO

1.Press and hold P until the IR segment flashes twice.

2.Using the number keys, press 9 9 5.

3.Press the key you set up to activate the macro.

4.Press and hold P until the IR segment flashes twice.

SETTING THE SLEEP TIMER

The RadioShack 4-in-One Remote includes a sleep timer that lets you set your devices up to be turned off after a specified time, even if the device does not have a sleep function.

ENABLING THE SLEEP TIMER

If the Sleep key does not operate your device’s built-in sleep timer or activate on the remote, you must enable the sleep timer for that mode:

1.Press a mode key (i.e., TV, VCR, CBL/SAT,

DVD).

2.Using the number keys, press 9 7 0. The top IR segment will blink two times to show that the sleep timer is available.

The sleep timer is now enabled for that device. Repeat these steps for each device where you want to use the sleep timer.

DISABLING THE SLEEP TIMER

If you prefer to use the device’s sleep timer, rather than the RadioShack 4-in-One Remote’s, you may disable the sleep timer for that mode:

1.Press a mode button (i.e., TV, VCR, CBL/ SAT, DVD).

2.Using the number keys, press 9 7 0. The top IR segment will blink four times to show that the sleep timer is no longer available.

The sleep timer is now disabled for that device. Repeat these steps for each device where you want to prevent the use of the sleep timer.

SETTING THE SLEEP TIMER

If you want to set any device to turn off after a specified time:

1.Press a mode key (TV, VCR, DVD, CBL/ SAT).

2.Press the Sleep key until the desired time is set. The timer increases by 15 minutes each time you press the key, up to 60 minutes.

When the timer counts down to 0, the remote sends a “power off ” signal to the selected device.

The sleep timer will work even if you have reassigned the mode key to a different mode (see “Reassigning Device Keys” on page 11).

If you turn off the device yourself, the sleep timer turns off as well.

CLEARING ALL CUSTOM PROGRAMMING

The RadioShack 4-in-One Remote contains a Custom Programming Reset program. You can use it to remove all custom programming, except your setup codes and reassigned device keys.

IMPORTANT: Executing this program will erase all custom settings for Volume Lock and Favorite Channels. However, your device programming remains.

1.Press and hold P until the IR segment flashes twice.

Setting the Sleep Timer 13