Radio Shack Kameleon 4-in-One Clearing ALL Programming, Troubleshooting, Clearing All Programming

Page 14

RS 4in1 Kam User Manual.fm Page 14 Friday, March 4, 2005 9:09 AM

4-IN-ONE REMOTE POWERED BY KAMELEON

2. Using the number keys, enter 9 8 0. The

PROBLEM:

During programming, the

IR segment will flash twice, pause, and

 

IR segment displays a long

flash twice again to confirm that all

 

 

flash.

custom programming is cleared.

 

 

 

CLEARING ALL

PROGRAMMING

The RadioShack 4-in-One Remote contains a Programming Reset program. You can use it to remove all custom programming, including your setup codes and reassigned device keys.

IMPORTANT: Executing this program will erase all custom settings for Volume Lock and Favorite Channels. It will also erase any device codes or reassigned modes.

1.Press and hold P until the IR segment flashes twice.

2.Using the number keys, enter 9 8 1. The IR segment will flash twice, pause, and flash twice again to confirm that all custom programming is cleared.

TROUBLESHOOTING

PROBLEM:

No display at all times.

SOLUTION:

Replace batteries with four

 

new AA alkaline batteries.

 

 

PROBLEM:

No display when

 

programming.

SOLUTION:

Display has turned off due

 

to inactivity. Start

 

programming again and do

 

not pause while performing

 

instructions.

 

 

SOLUTION:

An invalid entry has

 

occurred. Check the keys to

 

be pressed and start

 

program again.

 

 

PROBLEM:

The unit does not control

 

home entertainment

 

devices or commands are

 

not working properly.

SOLUTION:

Try all listed codes for the

 

device brands being set up.

 

Make sure they can be

 

operated with an infrared

 

remote control.

 

 

PROBLEM:

Favorite channel function

 

does not work properly.

SOLUTION:

Some devices (e.g., Cable

 

Boxes or Satellite Receivers)

 

use two-digit channel

 

numbers. During

 

programming, press ENTER

 

or OK after entering a

 

channel number (e.g., 0 2

 

ENTER for channel 2). See

 

“Programming Favorite

 

Channel Scan” on page 10.

 

 

PROBLEM:

Cannot find a working code

 

using the instructions in

 

“Searching For Your Code”

 

on page 9.

SOLUTION:

See our website

 

(www.radioshack.com) for

 

help or take the remote to

 

your local RadioShack

 

store.

 

 

PROBLEM:

Changing channels does not

 

work properly.

 

 

14 Clearing All Programming

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Table of Contents Introduction Installing BatteriesIN-ONE Remote Powered by Kameleon HOW Kameleon WorksTop IR segment flashes five times after pressing a key Quick Look AT Controls Quick Look at the ControlsPress Menu to display your devices main menu Press Power to turn a selected device on or offKEY Functions Press Mute to turn the sound off or onOr CH to select the next higher or lower channel Device Table Adjusting BrightnessProgramming a Device RCA Satellite Box RCA TV, VCR, and DVD PlayerProgramming a DVD PLAYER/ VCR Combo Programming a DVD Player/ VCR ComboPress VCR Checking the CodesSearching for Your Code VCR Code if usedUnlock Changing Volume LockChanging Volume Lock Programming Favorite Channel ScanReassigning Device Keys Using Channel ScanUsing Channel Scan To stop scanning channels at any time, press any keySetting the Tilt Switch Using MacrosSetting the Tilt Switch Setting the Sleep Timer Clearing ALL Custom ProgrammingSolution TroubleshootingProblem Clearing ALL ProgrammingDevice Menu Screens Problem No remote control of volumeDevice Menu Screens CABLE/PVR and SATELLITE/PVR Main MenuTV Main Menu DVD Main MenuPVR Main Menu Care SpecificationsSpecifications VCR Main MenuAdditional Information Instructions to the User Limited 90-DAY WarrantyAdditional Information M6123Limited 90-Day Warranty Except AS Provided HereinÍndice DE Materias 20 Índice de MateriasInstalación DE LAS Baterías IntroducciónCómo Funciona Kameleon IntroducciónEmpuje adelante en la cubierta del Instalación de las BateríasInstalación DE LAS Baterías EN EL Control Remoto Su lugarUNA Mirada Rápida a LOS Controles Una Mirada Rápida a los ControlesUna Mirada Rápida a los Controles Continuación Funciones DE LAS TeclasPresione VOL + Presione Mute enmudecer para apagar o encender el sonidoIN-ONE Remote Powered by Kameleon Tabla DE Dispositivos Programación DE UN Dispositivo AparatoAjuste del Brillo de la Pantalla TV/DVDProgramación DE UN Aparato Combinado DVD/VIDEOGRABADORA Programación de un Aparato Combinado DVD/VideograbadoraPresione VCR Búsqueda DE SU CódigoBúsqueda de su Código Código VCR si se usóCambio DEL Bloqueo DEL Volumen Verificación de los CódigosIndividual DE Volumen Programación de una Exploración de Canales FavoritosUSO DE LA Exploración DE Canales Uso de la Exploración de CanalesReasignación de las Teclas de Dispositivos USO DE LOS MacrosReasignación DE LAS Teclas DE Dispositivos Activación DEL Interruptor DE InclinaciónActivación DEL Cronómetro DE Dormido Programación del Cronómetro de DormidoBorrar Función DE UN Macro Remoción DE Toda LA Programación Remoción de Toda la Programación al GustoLocalización de Fallas ProblemaLocalización DE Fallas SoluciónPantallas DE Menúes DE Dispositivos Pantallas de Menúes de DispositivosSATÉLITE/PVR MENú Principal DE DVDDVD Información Adicional EspecificacionesCuidado EspecificacionesInstrucción Para EL Usuario Instrucción para el UsuarioGarantía Limitada de 90 Días Convertidores DE Cable Manufacturer’s Codes Códigos del FabricanteConverters TFC 0177, 0877, 04770066 0310Cavs Reproductores DVDAMW JVC GPXJBL KLHABS SVATYT BSR BOX SystemsBMC HTS GOIHNS NECAOC Setup Codes for TVSTelevisores CCEKEC CXCJCB KMCMTC MEIMGA NADTVS SSSTMK Contec 1188 Clarion 1188Colt 1015 Craig 1188 Advent 1966 Crown Akai 1908Zenith 1021, 1010, 1064 Citizen 0037, 0284 Colt 0072 Craig 0037, 0102, 0240 0271HI-Q 0182, 0050, 0094 Multitech 00790104, 0067, 0041 0109, 0240, 00420088
Top Page Image Contents