Radio Shack Kameleon 4-in-One owner manual Checking the Codes, Searching for Your Code, Press VCR

RS 4in1 Kam User Manual.fm Page 9 Friday, March 4, 2005 9:09 AM

a.Press VCR.

b.Using the number keys, enter the four-digit VCR code for your device. If performed correctly, the IR segment will flash twice.

NOTE: If a separate VCR setup code is not listed, you can use the VCR key to program a separate VCR device or another device (see “Reassigning Device Keys” on page 11).

8.For future reference, write down the working DVD Player/VCR Combo code in the below boxes:

DVD Player/VCR Code:

VCR Code (if used):

SEARCHING FOR YOUR CODE

If your device does not respond to the RadioShack 4-in-One Remote after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code.

NOTE: Before performing a code search for a CD or DVD player or a VCR, turn on the device and insert the required media.

For example, to search for a code for your TV:

1.Press a device key (e.g., TV). The selected device key will animate.

2.Press and hold P until the IR segment flashes twice.

3.Enter 9 9 1. The IR segment blinks twice.

4.Aim the remote at the TV and press Power. The remote sends IR codes from its library to the selected device, starting with the most popular code first.

OWNER’S MANUAL

5.If the TV responds, go to step 6. If the TV does not respond, press CH+. The remote will try the next code. Continue until the TV responds.

NOTE: Press CH- to try the previous code.

6.To lock in the code, press P. The IR segment blinks twice.

7.To search for other device codes, repeat steps 1 to 6, substituting the appropriate key for the device.

CHECKING THE CODES

If you have set up the remote control using the “Searching For Your Code” procedure (on page 9), you may need to find out which four- digit code is operating your equipment.

1.Press a desired device key (i.e., VCR, TV, CBL/SAT, or DVD). The selected device key will animate.

2.Press and hold P until the IR segment flashes twice.

3.Using the number keys, enter 9 9 0.

4.To view the code for the first digit, press 1. Count the number of times the IR segment flashes (e.g., three flashes = 3) and write down the number in leftmost box in the TV code boxes on page 8.

NOTE: If a code digit is “0”, the IR segment will not flash.

5.Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Write down the code digits in the remaining TV code boxes on page 8.

NOTE: If you enter an invalid number (e.g., 7) or key (e.g., Play), the IR segment will display one long flash and return to the “Other” programming screen. Start again with step 2.

Searching For Your Code 9