Radio Shack 15-2107 owner manual Programming Home Theater Mode, Deleting a Macro

Press POWER to turn on the TV.

Touch CAB/SAT to select the cable box.

Press POWER to turn on the cable box.

Touch 0 6 1 to enter the channel.

Hold down SELECT until IK99;II appears. ;N?J?D= appears, then the last-used mode screen.

Deleting a Macro

Note: If no key is pressed for 60 seconds, the remote control automatically exits setup. ;N?J?D= appears, and the remote returns to the previous mode screen.

Follow these steps to delete a macro.

1.Hold down P for at least 3 seconds. 9E:;ý I;J appears.

Note: To exit setup, hold down P for at least 3 sec- onds. ;N?J?D= appears, then the last-used mode screen.

2.Touch the down arrow four times. C79HEý A;O appears.

Note: If you scroll past the desired macro key (1M, 2M, or 3M), touch the up arrow to return to it.

3.Touch SELECT. I;BýC79HE appears.

4.Select the macro key (1M, 2M, or 3M) you want to delete and press it once. ;DJýC79HE appears.

5.Hold down SELECT until IK99;II appears. This action overwrites the existing data with no data. ;N?J?D= appears, then the last-used mode screen.

PROGRAMMING HOME THEATER MODE

Your remote control includes a custom Home Theater mode that allows you to access four groups of remote control keys without changing device modes. Moreover,

Preparation29